Ponderosa Pine Structural Timbers
Ponderosa pine (Pinus ponderosa) timbers, roughly squared in rough state with 22cm minimum cross-section for beam production. Classified in HTS 4403.21.0130 as other pine logs/timber meeting coniferous rough wood criteria.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If specifically Douglas fir variant
Statistical breakout within pine; Douglas fir sometimes separated despite Pinus relation.
If plywood made from these veneers
Rough logs exclude assembled products; plywood uses different heading.
If in veneer sheets post-processing
Veneer production changes from rough log to Chapter 44 thin sheets.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Ensure no end-trimming beyond rough state; trimmed ends may classify as 4407 sawn
• Batch-test moisture content; excessive drying risks semi-processed classification
• Label bundles clearly with species and dimensions for CBP inspection
Related Products under HTS 4403.21.01.30
Radiata Pine Logs 20cm Square
Rough-cut radiata pine (Pinus radiata) logs with smallest cross-sectional dimension over 15cm, stripped of bark but not further processed. Classified under HTS 4403.21.0130 as coniferous pine wood in the rough, specifically logs and timber meeting the size requirement for structural or lumber applications.
Lodgepole Pine Timber 18cm
Lodgepole pine (Pinus contorta) timber in the rough, roughly squared with minimum 18cm cross-section, suitable for sawmill processing. Falls under HTS 4403.21.0130 as 'other' pine logs/timber of coniferous wood in rough form, not stripped beyond basic preparation.
Scots Pine Rough Logs 25cm
Scots pine (Pinus sylvestris) logs in the rough, bark-removed with smallest cross-section 25cm, intended for construction timber. HTS 4403.21.0130 covers these as 'other' large-dimension pine coniferous wood logs.
Slash Pine Logs 16cm Cross-Section
Slash pine (Pinus elliottii) logs in rough form, sapwood removed, smallest dimension 16cm for pulpwood or lumber. HTS 4403.21.0130 applies to these 'other' dimension pine coniferous rough wood products.
Loblolly Pine Rough Timber 19cm
Loblolly pine (Pinus taeda) roughly squared timber with 19cm cross-section, bark-free for sawing into boards. Fits HTS 4403.21.0130 as coniferous pine 'other' logs/timber over 15cm dimension.