Loblolly Pine Structural Beams Rough
Rough-squared structural beams from Loblolly pine exceeding 15 cm cross-section, minimally processed for load-bearing. HTS 4403.21.0120 classification for large Southern yellow pine in rough condition.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If surfaced on four sides (S4S)
Planed or surfaced wood exceeds 'rough' definition moving to sawn wood.
If laminated from multiple pieces
Laminated wood products regardless of species use heading 4412.
If further manufactured into articles
Transformation into finished wood products shifts to Chapter 44 articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Grade stamp verification not required for rough wood but aids commercial value
• Calculate duties based on actual volume measurement at port of entry
• Consider bonded warehouse entry for future processing flexibility
Related Products under HTS 4403.21.01.20
Southern Yellow Pine Logs
Rough-cut logs from Loblolly pine (Pinus taeda) with smallest cross-sectional dimension over 15 cm, stripped of bark but not further processed. Classified under HTS 4403.21.0120 as coniferous pine wood in the rough, specifically Southern yellow pine species.
Loblolly Pine Timber
Roughly squared timber from Loblolly pine (Pinus taeda), Southern yellow pine variant, with minimum 15 cm cross-section for construction use. Fits HTS 4403.21.0120 as unprocessed coniferous pine logs/timber of specified Southern species.
Longleaf Pine Rough Logs
Unprocessed logs from Longleaf pine (Pinus palustris) with bark partially stripped, cross-section exceeding 15 cm, used for lumber production. HTS 4403.21.0120 covers these specific Southern pine species in rough form.
Slash Pine Construction Timber
Rough timber from Slash pine (Pinus elliottii), Southern yellow pine group, squared with 18 cm minimum cross-section for structural beams. Precisely matches HTS 4403.21.0120 criteria for large-dimension Southern pine rough wood.
Shortleaf Pine Lumber Logs
Rough logs of Shortleaf pine (Pinus echinata) measuring over 15 cm cross-section, sapwood removed, destined for sawmills. Classifies under HTS 4403.21.0120 for designated Southern pine rough coniferous wood.
Pitch Pine Rough Timber
Unplaned timber from Pitch pine (Pinus rigida), specific Southern species with 16 cm+ cross-section in rough state. HTS 4403.21.0120 explicitly includes this pine variety as coniferous rough wood.