Pressure-Treated Poplar Fence Post

Nonconiferous poplar wood fence posts pressure-treated with waterborne preservatives like ACQ for durability in outdoor fencing. Supplied in rough-squared form without bark, ideal for farm perimeter fences, fitting HTS 4403.12.0040 as treated nonconiferous posts.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+35.0%35%
🇲🇽MexicoFree+10.0%10%
🇨🇦CanadaFree+10.0%10%
🇩🇪GermanyFree+10.0%10%
🇯🇵JapanFree+10.0%10%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

4403Same rate: 35%

If stripped of bark/sapwood but untreated with preservatives

Untreated rough nonconiferous wood posts fall under 4403.10, excluding the preservative treatment criterion of 4403.12.

4401.21.00Same rate: 35%

If not squared and left in log/round form

Round, untreated nonconiferous logs without rough squaring are fuel wood or rough wood under 4401, not specified posts.

4421Lower: 13.3% vs 35%

If cut to precise lengths with decorative or finished ends

Finished or worked wooden posts beyond rough state become 'other articles of wood' in 4421.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Label shipments clearly with treatment type (e.g

ACQ, CCA) and retention levels to comply with EPA and customs verification

Measure dimensions pre-import to confirm 'post' sizing (typically 4-6 inches square) vs. poles or piles

Avoid bundling with hardware attachments, as assembled fence kits may classify under different chapters