Hemlock Edging Scrap
Chips from hemlock board edging operations, not agglomerated. HTS 4401.49.00.90 coniferous waste from dimension lumber production.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +37.5% | 37.5% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +12.5% | 12.5% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If briquetted >25mm cross-section
Briquette definition requires minimum dimension >25mm diameter.
If sulfite pulp grade
Chemical wood pulp, sulfite vs mechanical processing changes chapter.
If assembled into plywood
Plywood panels regardless of wood species classified as finished goods.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right HTS code — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Western hemlock common; specify region affects rot resistance claims
• Edger chip length varies by saw; measure maximum dimension
• Test for pitch pockets; resin pockets affect burning characteristics
Related Products under HTS 4401.49.00.90
Oak Sawdust
Fine sawdust generated from oak wood processing in furniture manufacturing, not agglomerated into pellets or briquettes. Classified under HTS 4401.49.00.90 as non-agglomerated sawdust and wood waste from mechanical wood processing. Used primarily for animal bedding, mulch, or compost.
Pine Wood Shavings
Coarse shavings from pine lumber milling operations, not agglomerated. Falls under HTS 4401.49.00.90 as non-agglomerated coniferous wood waste and scrap. Commonly used for horse bedding and landscaping mulch.
Walnut Wood Dust
Ultra-fine walnut wood dust collected from woodworking machinery, not agglomerated. HTS 4401.49.00.90 covers this non-coniferous wood waste used in specialty finishes and fillers.
Mixed Hardwood Sawdust
Sawdust mixture from various hardwood species (maple, cherry, oak) from cabinetry production, not agglomerated. Classifies under HTS 4401.49.00.90 as other non-agglomerated wood waste.
Cedar Wood Chips Scrap
Irregular cedar wood chips and particles from milling operations, not agglomerated into fuel forms. HTS 4401.49.00.90 for non-agglomerated coniferous wood scrap used in repellents and mulch.
Birch Wood Lathe Scrap
Stringy scrap from birch wood lathe turning operations, not agglomerated. HTS 4401.49.00.90 covers this non-coniferous fibrous wood waste used in paper pulp trials.