Oak Wood Pellets
Cylindrical oak wood pellets made from sawdust and shavings of mechanical wood processing, compressed with minimal binder under 3% by weight, diameter under 25mm and length under 100mm. Classified under 4401.39.42 as agglomerated sawdust and wood waste in pellet form, not qualifying for coniferous-specific subheadings. Ideal for residential heating stoves and biomass boilers.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +35.0% | 35% |
| 🇲🇽Mexico | Free | +10.0% | 10% |
| 🇨🇦Canada | Free | +10.0% | 10% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +10.0% | 10% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sourced from coniferous species like pine or spruce
Coniferous wood pellets specifically classified under 4401.31, while 4401.39 covers non-coniferous pellets per subheading notes.
If agglomerated into briquettes >25mm cross-section
Briquettes from any wood waste with larger dimensions fall under 4401.32 regardless of species, per legal definition.
If not strictly meeting pellet specs but similar agglomerated form
Other agglomerated forms neither pellets nor briquettes default to .40, while .42 applies to specific 'other' agglomerated waste forms.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify pellet dimensions (diameter ≤25mm, length ≤100mm) and binder content ≤3% via lab testing to confirm 4401.31 eligibility if applicable, avoiding misclassification
• Provide mill certificates documenting wood source as non-coniferous waste/scrap and agglomeration process to support 4401.39.42 declaration
• Watch for contamination with treated wood; fumigation certificates required if IPPC standards apply for wood fuel imports
Related Products under HTS 4401.39.42
Mixed Hardwood Briquettes
Cubiform briquettes from mixed oak, maple, and beech sawdust, agglomerated by compression with binder ≤3% by weight, cross-section >25mm. Falls under 4401.39.42 as non-coniferous agglomerated wood waste not qualifying as standard pellets. Used in outdoor fire pits and BBQ grills.
Walnut Shell Pellets
Compressed walnut shell and sawdust pellets for industrial fuel, cylindrical ≤25mm diameter from woodworking waste, binder ≤3%. Classified in 4401.39.42 as agglomerated woody waste not from conifers. Popular for biomass power generation.
Birch Wood Logs from Scrap
Agglomerated birch sawdust pressed into fuel logs, similar form to billets but from waste/scrap, non-coniferous. HTS 4401.39.42 captures these 'similar forms' of agglomerated waste not fitting pellets/briquettes precisely. Used in fireplace log sets.
Mahogany Sawdust Pellets
Premium mahogany sawdust agglomerated into fuel pellets for high-end biomass stoves, meeting pellet specs but tropical species excludes coniferous headings. 4401.39.42 applies to these non-standard wood pellets. Favored for clean-burning properties.
Fruitwood Mixed Briquettes
Briquettes from apple, cherry, and peach wood shavings blended for smoking fuels, agglomerated >25mm dimensions. Non-coniferous waste product under 4401.39.42 'other' agglomerated forms. Essential for BBQ and meat smoking.
Teak Wood Waste Pellets
Pellets manufactured from teak furniture-making shavings and sawdust, compressed for marine boiler fuel, tropical non-coniferous. 4401.39.42 classification for agglomerated exotic wood waste. High calorific value for industrial use.