Ricon 100 SBS Crumbs
Ricon 100 SBS crumbs are low molecular weight, solution-polymerized styrene-butadiene-styrene elastomers in crumb form, <50% styrene, for pressure-sensitive adhesives. HTS 4002.19.00.14 covers these as uncompounded primary synthetic rubber forms. Liquid-like viscosity but supplied solid per primary definitions.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If formed into plates/sheets >5mm
Plates/sheets of vulcanized rubber classify in 4008 per geometric shape note.
If oligomer/liquid resin form
Very low MW versions may classify as cyclic hydrocarbons if plastic-like.
If refractory compound mixtures
Specialty uses in refractories shift to prepared chemical binders.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Specify crumb size distribution to confirm 'primary forms' vs processed strip (4008)
• Origin determination critical for GSP eligibility; solution process typically non-China
• Watch for plasticizer content - only permitted if mineral oil for oil-extended rubber
Related Products under HTS 4002.19.00.14
Kraton D1192 SBS Granules
Kraton D1192 is a styrene-butadiene-styrene (SBS) block copolymer produced by solution polymerization, supplied in granular form with less than 50% styrene content. This thermoplastic elastomer falls under HTS 4002.19.00.14 as it meets the definition of synthetic rubber in primary granular form, suitable for compounding into adhesives and sealants. It retains essential raw material character without prohibited additives like vulcanizing agents.
Calprene 411 SBS Powder
Calprene 411 is a solution-polymerized SBS thermoplastic elastomer in powder form, containing under 50% styrene, used primarily in hot-melt adhesives. Classified under HTS 4002.19.00.14 as synthetic rubber granules/crumbs/powders per Chapter 40 definitions, excluding compounded forms. Ideal for easy dispersion in polymer formulations.
Stereon 845A SBS Granules
Stereon 845A SBS granules are solution-polymerized styrene-butadiene-styrene thermoplastic elastomers with low styrene content, for footwear soling compounds. Under HTS 4002.19.00.14 as primary form synthetic rubber granules, not suitable as-is due to raw state. Excludes textile/electrical articles per Chapter exclusions.
Asaphlex 30S SBS Powder
Asaphlex 30S is a fine SBS powder from solution polymerization, ≤50% styrene, designed for asphalt modification and sealants. Classifies in HTS 4002.19.00.14 as synthetic rubber powder meeting primary form criteria without disallowed compounding. Thermoplastic elastomer retains rubber recovery properties.
Dynasol Calprene 701 SBS Granules
Dynasol Calprene 701 SBS granules feature solution-polymerized SBS with balanced styrene (<50%), used in polymer modification and compounding. Falls under HTS 4002.19.00.14 as thermoplastic elastomer granules qualifying as synthetic rubber primary forms. No vulcanization or disallowed additives present.
Polish SBS 30/70 Granules
Polish SBS 30/70 granules are 30% styrene solution SBS thermoplastic elastomer granules for polish formulations. HTS 4002.19.00.14 applies to these primary synthetic rubber granules. Oil-extended permitted.