Metallized PET Greenhouse Shading Film
Metallized PET film for agricultural greenhouses, reflecting sunlight to control temperature. This noncellular, non-supported poly(ethylene terephthalate) film qualifies for HTS 3920.62.0050 as other metallized PET, PET >95% by weight. Sold in wide rolls for clipping to frames.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If pre-perforated or sewn into panels
Fabricated into articles beyond basic film classifies as other plastic shapes in 3921.
If polyester copolymer with modifiers
Fails 95% PET test per note (a)(2-4), goes to other polyesters.
If rigid extruded sheets >1mm thick
Thickness and rigidity move to noncellular plastic plates over 1mm in 3923.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify UV resistance and PET composition; agricultural use may qualify for special programs but verify base duty
• Ensure no reinforcing scrim; pure film stays 3920.62
Related Products under HTS 3920.62.00.50
Metallized PET Window Insulation Film
Thin metallized polyethylene terephthalate (PET) film used for insulating windows to reduce heat loss and block UV rays. It meets HTS 3920.62.0050 as noncellular, unsupported metallized PET film, classified under poly(ethylene terephthalate) per subheading rules where PET monomers exceed 95% by weight. Primarily imported in rolls for residential DIY application.
Metallized PET Food Packaging Film
Metallized PET film for flexible packaging of snacks and dry foods, providing barrier properties against oxygen and light. Classified in HTS 3920.62.0050 as 'other' metallized PET film, noncellular and unsupported, with PET comprising over 95% polymer content per chapter notes. Imported in large jumbo rolls for converters.
Metallized PET Capacitor Film
High-clarity metallized PET film for metallized film capacitors in electronics, offering dielectric strength. HTS 3920.62.0050 applies to this thin (<10 micron), noncellular, unsupported polyester film where PET monomers dominate (>95%). Imported in precision-slit rolls.
Metallized PET Bubble Barrier Film
Metallized PET film laminated to bubble wrap for thermal insulation in packaging/mailers. However, the PET layer alone is classified as unsupported metallized film under HTS 3920.62.0050 if imported separately, PET monomers 95%+. Used in construction and shipping.
Metallized PET Security Hologram Base Film
Specialty metallized PET film serving as base for embossed security holograms on labels/documents. HTS 3920.62.0050 covers this thin, noncellular metallized poly(ethylene terephthalate) film (PET >95%), imported in rolls for hologram converters.
Metallized PET Thermal Blanket Film
Metallized PET film for emergency thermal blankets, reflecting body heat. As noncellular unsupported metallized poly(ethylene terephthalate) film, it fits HTS 3920.62.0050 ('Other'), with PET at 95%+ polymer content per notes.