Airport Runway Edge Marking Tape
Self-adhesive tape 5 inches wide with glass bead coating for high-visibility runway edge marking at airports, in rolls under 20 cm. HTS 3919.10.10.10 applies for its pavement marking purpose and light-reflecting glass grain surface. FAA-compliant for aviation safety.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If used for non-pavement airport signage
Plastic sheets for signs/indoor use lack pavement-specific adhesive durability.
If not specifically for pavement marking
General glass-bead reflective tapes (non-pavement) have separate statistical suffix.
If rubber-dominant construction
Rubber conveyor/ transmission belting with reflectivity shifts to Chapter 40.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit FAA AC 150/5340 specs; reflectivity must meet minimum candela values
• Ensure UV resistance documentation; fading beads disqualify pavement classification
• Avoid declaring as general signage—pavement contact is key criterion
Related Products under HTS 3919.10.10.10
Bike Lane Reflective Tape 2-inch
Narrow 2-inch self-adhesive plastic tape with embedded glass grains for bicycle lane pavement marking on urban streets, in rolls. HTS 3919.10.10.10 due to pavement application, ballotini reflectivity, and width <20 cm. Enhances cyclist visibility at night.
Yellow Skip Line Marking Tape 5-inch
5-inch yellow self-adhesive tape with glass grains for skip line pavement markings on multilane roads, in rolls under 20 cm. Meets 3919.10.10.10 for self-adhesive plastic, ballotini reflection, and pavement designation. High visibility for passing zones.
Reflective Pavement Marking Tape 4-inch
Self-adhesive plastic tape in rolls of 4 inches (10 cm) width, featuring glass grains (ballotini) for light reflection, specifically designed for marking road lanes and centerlines. Classified under HTS 3919.10.10.10 due to its self-adhesive nature, narrow roll width under 20 cm, and reflective surface from glass beads used on pavements. Meets highway safety standards for durability under traffic and weather exposure.
Highway Centerline Marking Tape 6-inch
6-inch wide self-adhesive PVC tape in rolls, embedded with glass microspheres for retroreflectivity, used for temporary or permanent centerline striping on highways. Fits HTS 3919.10.10.10 as pavement-specific tape with ballotini-reflective surface and roll width under 20 cm. Offers high shear strength for high-traffic roads.
Temporary Road Work Zone Tape 3-inch
3-inch removable self-adhesive tape with ballotini glass beads for temporary road work zone markings, dispensed in narrow rolls. Classifies in 3919.10.10.10 for self-adhesive plastic pavement tape with reflective grains under 20 cm width. Ideal for construction sites with clean removal.
Preformed Thermoplastic Pavement Tape
Self-adhesive preformed rolls of thermoplastic plastic tape 4-8 inches wide with glass bead intermix for hot-applied pavement marking. 3919.10.10.10 classification for reflective surface via ballotini, narrow rolls, and road pavement use. Used for long-life lane lines.