Share:|Follow us on LinkedIn

Rigid PETG Tubing Segments

Glycol-modified polyethylene terephthalate (PETG) rigid tubing pieces under 200 mm for 3D printing and prototyping. HTS 3917.29.00.50 for rigid tubes of other plastics (copolyester).

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China3.1%+35.0%38.1%
🇲🇽Mexico3.1%+10.0%13.1%
🇨🇦Canada3.1%+10.0%13.1%
🇩🇪Germany3.1%+10.0%13.1%
🇯🇵Japan3.1%+10.0%13.1%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

3920.62.00Higher: 39.2% vs 38.1%

If PET sheet stock for forming

Plates/sheets of polyesters classify in 3920, not formed tubes.

3917.22.00Same rate: 38.1%

If propylene copolymer blends

If propylene predominates, shifts to 3917.22.

3921.90Lower: 14.8% vs 38.1%

If reservoirs or non-tube containers

Plastic reservoirs exclude true tubular pipes.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Get AI-powered classificationCalculate exact duty

Import Tips & Compliance

• Prove >95% comonomer content for copolymer per note (a)(2) if applicable

• Invoice as 'segments' not continuous coils to fit length criterion

Related Products under HTS 3917.29.00.50

Acrylic Rigid Tubing Cutoffs

Polymethyl methacrylate (acrylic) rigid tubing pieces less than 200 mm long, used in aquariums, displays, and lab equipment. Falls under HTS 3917.29.00.50 for rigid tubes of other plastics, distinguished by predominant monomer unit per subheading notes.

Polystyrene Rigid Straw Tubes

Rigid polystyrene tubes less than 200 mm, used as industrial straws or sample transport in labs. HTS 3917.29.00.50 applies to rigid tubes of styrene polymers as 'other plastics'.

Nylon Rigid Capillary Tubes

Rigid polyamide-6 (nylon) capillary tubes <200 mm for medical fluid transfer and instrumentation. Classified 3917.29.00.50 for rigid tubes of other plastics like polyamides.

Polypropylene Short Rigid Pipes

Wait, no—PP is 3917.22. But for copolymer blends where PP <95%, short rigid polypropylene-blend pipes <200 mm for chemical transport. Fits 3917.29.00.50 per note (a)(4) predominant monomer rule.

Rigid Fluoropolymer Tubes

Rigid PVDF (polyvinylidene fluoride) tubes <200 mm for corrosive chemical handling. HTS 3917.29.00.50 as rigid tubes of other plastics (fluoropolymers).

ASA Rigid Plumbing Stubs

Acrylonitrile-styrene-acrylate (ASA) copolymer rigid stubs <200 mm for outdoor plumbing. 3917.29.00.50 for rigid other plastics copolymers.