PVC Round Profile Dowel
Cylindrical dowel rod of solid PVC polymer, diameter 10 mm (>1 mm), used for joining panels in shelving. Classified under HTS 3916.20.00 as a rod of polymers of vinyl chloride, not further worked beyond polishing. Conforms to 95% PVC monomer requirement.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If imitation wood grain finish for consumer use
Surface-worked to imitate wood may classify as wooden articles if presented as such, per GRI notes on imitations.
If precision-ground or threaded
Any machining beyond surface-working (e.g., threads for screws) makes it an 'other article' under 3926.90.
If hollow tubular form
Hollow PVC profiles resembling tubes classify in 3917 for cellulose polymers, but PVC tubes go there if polymerized tubularly.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Measure and certify diameter on commercial invoice; specify 'not machined'
• Avoid chamfered ends to stay in 3916
• Common issue: Confusion with wood dowels in mixed shipments
Related Products under HTS 3916.20.00
PVC Rigid Rod
A straight, cylindrical rod made from polyvinyl chloride (PVC) polymer, with a diameter exceeding 1 mm, used in structural applications like furniture frames or machine guards. It falls under HTS 3916.20.00 as a monofilament-equivalent or rod of PVC polymers, surface-worked but not further processed into finished articles. The uniform cross-section and PVC composition meet the chapter's polymer classification rules for vinyl chloride polymers.
PVC U-Channel Profile
A U-shaped profile shape extruded from PVC polymers, with all cross-sectional dimensions over 1 mm, commonly used for edging in construction or signage frames. Classified in HTS 3916.20.00 due to its profile shape of vinyl chloride polymers, not further worked beyond extrusion and surface finishing. Meets polymer purity rules without chemical modification.
PVC Square Monofilament Stock
Square-cross-section monofilament exceeding 1 mm per side, made purely from PVC polymers, used as stock for weaving or reinforcement in composites. HTS 3916.20.00 applies as it is a monofilament of vinyl chloride polymers, surface-worked (e.g., smoothed) but not twisted or braided. Polymer composition adheres to 95% monomer rule.
PVC Flat Strip Profile
Rectangular flat strip of PVC with thickness >1 mm and width up to 50 mm, used for sealing or trim in automotive interiors. Falls under HTS 3916.20.00 as a profile shape of polymers of vinyl chloride, extruded and surface-calendered but not otherwise shaped. Pure PVC composition per chapter polymer rules.
PVC T-Slot Structural Stick
T-shaped stick profile extruded from rigid PVC, all dimensions >1 mm, for framework in greenhouses or displays. HTS 3916.20.00 covers it as a profile shape of vinyl chloride polymers, lightly surface-worked for smoothness. No copolymers or modifiers per subheading criteria.
PVC L-Profile Angle
L-shaped angle profile from PVC, legs >1 mm thick, for corner protection in construction. HTS 3916.20.00 as profile shapes of vinyl chloride polymers, extruded and deburred. Pure polymer without plasticizers.