PVC Window Profile Scrap
Waste scraps from extruded polyvinyl chloride (PVC) profiles used in window frames, consisting primarily of rigid PVC with over 95% vinyl chloride monomer units by weight. Classified under HTS 3915.30.00.00 as scrap of polymers of vinyl chloride per subheading note (a)(1). These trimmings and rejects arise during manufacturing cuts and defects.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If reprocessed into PVC granules or powder
Reprocessed PVC scrap converted into pellets or powder for further use falls under tubes, pipes, fittings, and similar articles of plastics.
If contaminated below 95% vinyl chloride or mixed polymers
Scrap not predominantly vinyl chloride polymers is classified by the predominant monomer under non-cellular sheets/plates per subheading note (a)(4).
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Verify polymer composition via lab testing to confirm 95%+ vinyl chloride content; retain manufacturing waste certificates; avoid misclassification as usable profiles under 3916 or 3925
Related Products under HTS 3915.30.00.00
PVC Pipe Trimmings and Cuttings
Parings and scrap generated from cutting rigid PVC pipes during production, with vinyl chloride polymers comprising over 95% by weight. Falls under 3915.30.00.00 as waste of PVC polymers according to chapter subheading notes. Typically clean, uncontaminated factory waste suitable for recycling.
Rigid PVC Sheet Edge Scrap
Edge trimmings and waste from calendared rigid PVC sheets used in signage and panels, predominantly polymers of vinyl chloride (>95% by weight). Classified in 3915.30.00.00 per polymer classification rules in subheading note (a)(1). Generated from sizing operations in sheet production.
PVC Floor Tile Manufacturing Scrap
Waste parings from punching and trimming rigid PVC floor tiles, composed of >95% vinyl chloride polymers by weight. Under HTS 3915.30.00.00 as scrap of PVC per chapter notes on polymer content. Clean factory rejects from tile forming processes.
Extruded PVC Profile Rejects
Defective rejects and startup scrap from PVC profile extrusion for doors/frames, with vinyl chloride monomer units >95% of polymer weight. HTS 3915.30.00.00 classification follows subheading note (a)(1) for pure PVC polymers. Includes off-spec lengths and surface defect pieces.
PVC Medical Tubing Waste
Scrap from flexible PVC tubing production for medical devices, primarily vinyl chloride polymers (95%+ by weight). Fits 3915.30.00.00 as PVC waste per polymer definition rules. Clean trimmings from cutting IV bags and catheters.
PVC Wire Insulation Scrap
Stripped insulation waste from PVC-coated electrical wires, predominantly polymers of vinyl chloride. Classified 3915.30.00.00 following subheading notes for >95% VC content. Free from metal contamination post-stripping.