PS Foam Profile Extrusion Waste
Start-up scrap and edge trims from PS foam profile extrusion for crown molding and picture frames, qualifying as styrene scrap.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cellular extrusion profiles
Untrimmed profiles are finished cellular plates/sheets.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Profile-specific grinding equipment; avoid compression damage; moisture control critical
Related Products under HTS 3915.20.00.00
Polystyrene Foam Scrap
Waste fragments and trimmings from expanded polystyrene (EPS) foam manufacturing, primarily composed of polystyrene polymers meeting the 95% monomer content requirement per subheading note (a)(1). Classified under 3915.20.00.00 as scrap of polymers of styrene, typically generated during packaging or insulation production.
ABS Plastic Manufacturing Scrap
Parings and scrap from acrylonitrile-butadiene-styrene (ABS) copolymer production where styrene monomer units exceed 95% by weight of total polymer content, per subheading note (a)(1). This waste arises from injection molding of automotive parts and electronics housings.
High-Impact Polystyrene (HIPS) Trimmings
Trimmed edges and parings from HIPS sheet extrusion for refrigerator linings and packaging, consisting of polystyrene modified with polybutadiene but with ≥95% styrene units by weight. Falls under 3915.20.00.00 as styrene polymer scrap per Chapter 39 definitions.
Styrene-Acrylonitrile (SAN) Copolymer Scrap
Waste from SAN copolymer molding for kitchenware and medical devices, classified here only if styrene units comprise ≥95% of polymer weight per note (a)(2). Common scrap from blow molding operations.
Crystal Polystyrene (GPPS) Sheet Scrap
Parings from general purpose polystyrene (GPPS) sheet production for CD cases and signage, pure polystyrene with 100% styrene monomers qualifying under 3915.20.00.00 waste provisions.
Expanded Polystyrene (EPS) Packaging Waste
Post-industrial scrap from EPS foam blocks used in electronics packaging, confirmed as polystyrene polymer scrap under 3915.20.00.00 when styrene content meets Chapter 39 criteria.