Spray-Dried Urea Formaldehyde Microcapsules
Microencapsulated urea-formaldehyde resin in primary powder form for controlled-release applications in inks and fragrances. Still HTS 3909.10.00.00 as chemically unmodified polymer shell (>95% content). Particle size 1-50 microns enables precise encapsulation.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If articles of plastic closures/stoppers
Functional plastic articles like caps classify under Chapter 39 finished goods.
If pre-loaded with active ingredients >5%
Encapsulated preparations become chemical mixtures.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Prove shell is unmodified polymer via FTIR analysis; specify core content <5% total weight; use anti-static packaging to prevent agglomeration
Related Products under HTS 3909.10.00.00
Urea-Formaldehyde Resin Powder
Urea-formaldehyde resin in powdered primary form, produced by condensing urea and formaldehyde, used primarily in wood adhesives and particleboard production. It falls under HTS 3909.10.00.00 as a urea resin in primary form, meeting the 95% monomer content requirement for the named polymer. This thermosetting resin hardens irreversibly upon heating.
Melamine-Urea-Formaldehyde (MUF) Copolymer Resin
A copolymer resin where urea-formaldehyde units predominate over 95% by weight, used in laminated wood panels and molding compounds. Classified under HTS 3909.10.00.00 due to the predominant urea resin content per subheading note (a)(4). It offers enhanced moisture resistance compared to pure urea-formaldehyde.
Thiourea-Formaldehyde Resin Granules
Thiourea-formaldehyde resin in granular primary form, a sulfur analog of urea resins used in specialty adhesives and ion-exchange resins. It qualifies for HTS 3909.10.00.00 as explicitly named thiourea resins in primary forms. Less common than urea types but valued for chemical resistance.
Urea-Resin Molding Compound Pellets
Pelletized urea-formaldehyde resin in primary form for compression molding of electrical insulators and dinnerware. Falls under HTS 3909.10.00.00 as unmodified urea resin exceeding 95% polymer content. Provides high rigidity and heat resistance in finished molded articles.
Liquid Urea-Formaldehyde Pre-Condensate Resin
Low-molecular-weight liquid urea-formaldehyde resin (pre-polymer) in primary form for plywood glues, with >95% urea-formaldehyde units. Classified HTS 3909.10.00.00 as primary urea resin before final curing. Adjustable viscosity for spray or roller application in wood bonding.
Low-Formaldehyde Emission Urea Resin
Scavenger-modified urea-formaldehyde resin in primary powder form with reduced free formaldehyde for interior paneling. Still classified under HTS 3909.10.00.00 as the core urea resin meets 95% criteria per subheading note (a)(1). Meets CARB Phase 2 emission standards.