Share:|Follow us on LinkedIn

Nylon 11 Resin Beads

Biosourced polyamide-11 beads from 11-aminoundecanoic acid, used in high-performance cables and automotive parts. Meets HTS 3908.10.00.00 as named polyamide with required 95% monomer purity.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China6.3%+25.0%31.3%
🇲🇽Mexico6.3%—6.3%
🇨🇦Canada6.3%—6.3%
🇩🇪Germany6.3%—6.3%
🇯🇵Japan6.3%—6.3%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

3908Same rate: 31.3%

If polyamide-imide copolymer

Copolymers with imide units shift to specific polyamide-imide subheading.

3907.99Lower: 16.5% vs 31.3%

If for polyester copolymer blends

Predominant polyester monomer would classify under polyesters if composition testing shows less than 95% polyamide.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Get AI-powered classificationCalculate exact duty

Import Tips & Compliance

• Certify bio-based content if claiming preferences; provide relative viscosity specs; segregate from nylon-6 to prevent cross-contamination misclassification

Related Products under HTS 3908.10.00.00

Nylon 6 Resin Pellets

Polyamide-6 resin in the form of translucent pellets used for injection molding in industrial applications. This product falls under HTS 3908.10.00.00 because it is polyamide-6 where the caprolactam monomer unit contributes over 95% by weight of the total polymer content, meeting the specific subheading criteria for named polyamides in primary forms.

Nylon 6,6 Polymer Granules

Polyamide-6,6 granules derived from hexamethylenediamine and adipic acid monomers, supplied in primary form for extrusion processes. Classified under HTS 3908.10.00.00 as the constituent monomers contribute 95% or more by weight, per subheading note (a)(1).

PA12 Polyamide-12 Powder

Fine powder form of polyamide-12 (laurolactam-based) used in selective laser sintering for 3D printing. HTS 3908.10.00.00 applies due to 95%+ laurolactam monomer content in this primary form polymer.

Polyamide-6,10 Pellets

Engineering-grade polyamide-6,10 pellets from hexamethylenediamine and sebacic acid, offering high moisture resistance. Classified in HTS 3908.10.00.00 per explicit naming and 95%+ monomer content rule.

Capron Nylon-6 Chips

High-viscosity nylon-6 chips for fiber spinning in textile yarn production. HTS 3908.10.00.00 due to pure caprolactam polymerization meeting the 95% monomer threshold.

Zytel Nylon 6,6 Pellets

Branded Zytel® polyamide-6,6 pellets for injection molding of mechanical parts. Falls under HTS 3908.10.00.00 as specifically named polyamide in primary pellet form with proper monomer composition.