Industrial Grade PET Flakes for Sheet Extrusion
PET polymer flakes in primary form for extruding into plastic sheets for industrial applications. Under HTS 3907.69.00 as other poly(ethylene terephthalate) where PET units exceed 95% by weight.
Import Duty Rates by Country of Origin
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If for non-household flexible packaging films
Finished plastic film/sheets of PET classify under plates/sheets heading, not primary resin.
If unsaturated alkyd-type polyesters
Different polyester chemistries have specific subheadings based on polymer notes.
If silicone-modified PET
Chemically modified polymers follow 'Other' provisions or shift to silicones if predominant.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide particle size distribution and purity assays to confirm primary form status
• Document end-use as industrial sheets to differentiate from consumer packaging
Related Products under HTS 3907.69.00
PET Resin Pellets Grade 7940B
High-viscosity polyethylene terephthalate (PET) resin pellets, grade 7940B, used primarily for manufacturing blown bottles and containers. This product falls under HTS 3907.69.00 as it consists of PET polymer in primary pellet form with PET monomer units comprising over 95% by weight, classified as 'Other' PET not specifically covered elsewhere.
PET Preforms Resin CB12E
PET resin grade CB12E in pellet form for injection molding into preforms for beverage bottles. Classified in HTS 3907.69.00 as other PET in primary forms, excluding specific packaging or recycled variants.
Biaxially Oriented PET (BOPET) Base Resin
Primary PET resin pellets for producing biaxially oriented films used in packaging and labels. Classified HTS 3907.69.00 as other PET in pellet form prior to orientation processing.
Low-IV PET Resin for Foamed Applications
Low intrinsic viscosity PET resin for producing foamed plastic sheets and insulation. HTS 3907.69.00 as other primary PET form with standard monomer composition.
PET Chips for Textile Fiber Production
Polyethylene terephthalate chips designed for spinning into polyester fibers and yarns for textiles. Classified under HTS 3907.69.00 as primary form PET with terephthalate units over 95%, not specified for packaging or recording media.
Virgin PET Resin for Strapping Bands
High-tenacity virgin PET resin pellets optimized for producing plastic strapping bands used in packaging. Falls under HTS 3907.69.00 as 'Other' poly(ethylene terephthalate) in primary forms meeting the 95% monomer purity rule.