Amorphous PET Pellets for Strapping
Medium IV 75 ml/g amorphous PET for extrusion into polyester strapping used in packaging. Provides high tensile strength and low stretch under load. Primary form PET classified 3907.69.0010 per viscosity number requirement.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If after extrusion into finished strapping
Completed strapping articles move from resin to finished plastic products.
If drawn into high-tenacity filament
Textile yarns including polyester strapping filaments in Chapter 54.
If made into twine/cordage
Rope/twine products have separate classification.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Confirm crystallinity <5% for proper strapping extrusion window
• Specify elongation at break 50-100% for strapping performance
• Document yield strength >600 MPa post-orientation capability
Related Products under HTS 3907.69.00.10
PET Resin for Clear Plastic Bottles
Granular polyethylene terephthalate (PET) resin with a viscosity number of 70-78 ml/g, used primarily for blow-molding into clear beverage bottles. This specific intrinsic viscosity range ensures optimal melt strength and clarity for thin-walled containers. Classified under HTS 3907.69.0010 as PET in primary form meeting the exact viscosity specification.
Blow Molding Grade PET Chips
High-clarity PET chips with IV 72-77 ml/g designed for stretch blow molding of PET water and soda bottles. The viscosity range provides balanced stretch ratio and barrier properties essential for carbonated beverages. Falls under 3907.69.0010 as other PET in primary forms with specified intrinsic viscosity.
PET Preform Resin Pellets
Transparent PET pellets with 74 ml/g average viscosity for manufacturing bottle preforms used in beverage packaging. This IV specification balances preform injection and subsequent stretch blow molding performance. HTS 3907.69.0010 covers this exact PET specification in primary granular form.
Food Grade PET Granules 75 IV
FDA-compliant PET granules with 75 ml/g intrinsic viscosity for safe food contact packaging applications like water bottles. Meets strict purity requirements with controlled oligomer content for direct food contact approval. Primary form PET precisely matching 3907.69.0010 viscosity parameters.
Clear Bottle Grade PET Resin
High-clarity PET resin pellets IV 71-76 ml/g optimized for sparkling clear single-serve beverage bottles. Provides excellent gas barrier and drop impact resistance in thin wall construction. 3907.69.0010 specifically covers this viscosity range of PET in primary forms.
Pharma Bottle PET Resin IV 72
Ultra-pure PET resin 72 ml/g IV for pharmaceutical packaging bottles requiring low extractables. Meets USP Class VI and EP 3.1.15 standards for drug contact materials. Primary form PET precisely specified under 3907.69.0010 viscosity classification.