Acrylite GP Acrylic Pellets
Granular poly(methyl methacrylate) resin pellets for injection molding and extrusion into clear plastic products. Falls under 3906.10.00.00 as primary form PMMA with predominant methyl methacrylate monomer units exceeding 95% by weight.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If blended with other acrylic monomers under 95%
If methyl methacrylate doesn't predominate over other comonomers, classifies as 'Other acrylic polymers' per note (a)(4).
If copolymerized with ethylene
Ethylene-vinyl acetate copolymers with 95% named units fall under specific copolymer subheadings per note (a)(2).
If dissolved in solvent as liquid resin
Petroleum oils containing polymers classify under Chapter 27 if not solid primary forms.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit detailed resin data sheets confirming >95% PMMA composition to prevent customs disputes
• Ensure pellets are in primary form without additives exceeding allowed limits for polymer classification
• Watch for blending issues; polymer blends follow the predominant monomer rule under subheading note (b)
Related Products under HTS 3906.10.00.00
Plexiglas Acrylic Sheets
Transparent poly(methyl methacrylate) sheets used for glazing, signage, and protective barriers. Classified under HTS 3906.10.00.00 as it is poly(methyl methacrylate) in primary form, meeting the 95% monomer content requirement per subheading notes.
Perspex Acrylic Polymer Granules
High-clarity poly(methyl methacrylate) granules for optical applications like lenses and displays. HTS 3906.10.00.00 applies as primary form where methyl methacrylate units constitute 95%+ of polymer content.
Altuglas PMMA Extrusion Pellets
Specialty poly(methyl methacrylate) pellets optimized for profile extrusion into tubes and rods. Meets HTS 3906.10.00.00 criteria as unmodified PMMA primary form with required monomer purity.
Optix Acrylic Resin Beads
Spherical poly(methyl methacrylate) beads for cosmetics, chromatography, and light diffusion. Classified under 3906.10.00.00 as primary PMMA polymer meeting weight percentage rules.
Crylux PMMA Casting Syrup
Liquid poly(methyl methacrylate) syrup for casting into sheets and blocks. Considered primary form under HTS 3906.10.00.00 if polymer content meets predominant monomer criteria.
Degalan PMMA Molding Powder
Poly(methyl methacrylate) powder specifically for compression and rotational molding applications. HTS 3906.10.00.00 due to pure PMMA composition exceeding 95% methyl methacrylate.