PTFE Pellets for Injection Molding
High-molecular-weight polytetrafluoroethylene pellets designed for compression and injection molding applications. Meets HTS 3904.61.00 criteria as unfilled PTFE with ≥95% monomer units in primary pellet form.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 5.8% | +25.0% | 30.8% |
| 🇲🇽Mexico | 5.8% | — | 5.8% |
| 🇨🇦Canada | 5.8% | — | 5.8% |
| 🇩🇪Germany | 5.8% | — | 5.8% |
| 🇯🇵Japan | 5.8% | — | 5.8% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If low-MW copolymer grade
Non-qualifying copolymers go to residual fluoropolymer subheading.
If silicone-modified PTFE
Silicones classify under Chapter 39 heading 3910 regardless of base polymer.
If preformed into basic shapes
Articles exceeding primary form definition move to other plastic articles.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare melt flow index and molecular weight to prove primary resin status
• Avoid glass-filled variants, which shift to 3920.99; certify pure resin
Related Products under HTS 3904.61.00
PTFE Food Contact Compliant Resin
FDA-compliant polytetrafluoroethylene resin for food processing equipment components. Meets HTS 3904.61.00 as pure PTFE with required extractive limitations.
PTFE Chemical Processing Grade
High chemical resistance polytetrafluoroethylene for lining reactors and tanks. Pure resin form qualifies under HTS 3904.61.00 fluoropolymer heading.
High-Bulk Density PTFE
Polytetrafluoroethylene resin with engineered high bulk density (0.8+ g/cc) for automated molding. Pure PTFE composition qualifies under HTS 3904.61.00 primary polymer provisions.
PTFE for Electrical Insulation
Low dielectric loss polytetrafluoroethylene resin for wire insulation extrusion. Meets HTS 3904.61.00 as ≥95% pure PTFE monomer in primary form.
PTFE Aerospace Grade Resin
Polytetrafluoroethylene meeting aerospace specifications (AMS 3660) for seals and bearings. HTS 3904.61.00 classification as specification-grade pure PTFE polymer.
Virgin Polytetrafluoroethylene Resin
Pure polytetrafluoroethylene (PTFE) resin in granular form, consisting of 100% PTFE monomer units, used as a base material for molding into sheets, rods, or other shapes. It falls under HTS 3904.61.00 as it meets the 'poly' prefix requirement of 95% or more PTFE content by weight in primary form.