PTFE Fine Powder Resin
Micronized polytetrafluoroethylene fine powder (average particle size 0.2-10 microns) for paste extrusion into wires and tubes. Classified in HTS 3904.61.00 as pure PTFE in primary form exceeding 95% monomer content.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 5.8% | +37.5% | 43.3% |
| 🇲🇽Mexico | 5.8% | +10.0% | 15.8% |
| 🇨🇦Canada | 5.8% | +10.0% | 15.8% |
| 🇩🇪Germany | Free | +10.0% | 10% |
| 🇯🇵Japan | Free | +12.5% | 12.5% |
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If blended with lubricants >5%
Blends failing 95% PTFE criterion classify by predominant monomer under 'other fluoropolymers'.
If sold as prepared extrusion aid
Mixtures exceeding simple polymer scope move to chemical preparations.
If processed into unsintered film
Non-primary forms like unsintered sheets classify as other plates/films.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide bulk density and particle size specs in commercial invoice to distinguish from filled grades
• Ensure MSDS confirms no additives exceeding 5% to maintain pure PTFE classification
Related Products under HTS 3904.61.00
PTFE Food Contact Compliant Resin
FDA-compliant polytetrafluoroethylene resin for food processing equipment components. Meets HTS 3904.61.00 as pure PTFE with required extractive limitations.
PTFE Chemical Processing Grade
High chemical resistance polytetrafluoroethylene for lining reactors and tanks. Pure resin form qualifies under HTS 3904.61.00 fluoropolymer heading.
High-Bulk Density PTFE
Polytetrafluoroethylene resin with engineered high bulk density (0.8+ g/cc) for automated molding. Pure PTFE composition qualifies under HTS 3904.61.00 primary polymer provisions.
PTFE for Electrical Insulation
Low dielectric loss polytetrafluoroethylene resin for wire insulation extrusion. Meets HTS 3904.61.00 as ≥95% pure PTFE monomer in primary form.
PTFE Aerospace Grade Resin
Polytetrafluoroethylene meeting aerospace specifications (AMS 3660) for seals and bearings. HTS 3904.61.00 classification as specification-grade pure PTFE polymer.
Virgin Polytetrafluoroethylene Resin
Pure polytetrafluoroethylene (PTFE) resin in granular form, consisting of 100% PTFE monomer units, used as a base material for molding into sheets, rods, or other shapes. It falls under HTS 3904.61.00 as it meets the 'poly' prefix requirement of 95% or more PTFE content by weight in primary form.