Share:|Follow us on LinkedIn

Micronized PTFE Powder

Ultra-fine ground polytetrafluoroethylene powder (1-20 micron) used as lubricant additive in engineering plastics. HTS 3904.61.00 as primary PTFE polymer meeting purity threshold.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China5.8%+25.0%30.8%
🇲🇽Mexico5.8%—5.8%
🇨🇦Canada5.8%—5.8%
🇩🇪Germany5.8%—5.8%
🇯🇵Japan5.8%—5.8%

More Specific Codes

This product may fall under a more specific subheading:

3904.61.00.10Granular, whether or not filled or compounded (see statistical note 1 to this chapter)
→
3904.61.00.90Other
→

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

3403.19Lower: 15.8% vs 30.8%

If used as lubricant grease

Lubricating preparations exclude pure polymers.

3904.69Lower: 16.5% vs 30.8%

If hybrid fluoropolymer

Blends classify by predominant monomer unit.

3920.99Lower: 15.8% vs 30.8%

If compacted into additive masterbatch

Processed forms beyond primary resin scope.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Get AI-powered classificationCalculate exact duty

Import Tips & Compliance

• Specify grind method (jet mill vs. cryogenic) and D50 particle size

• Certify free of agglomeration for primary powder status

Related Products under HTS 3904.61.00

PTFE Food Contact Compliant Resin

FDA-compliant polytetrafluoroethylene resin for food processing equipment components. Meets HTS 3904.61.00 as pure PTFE with required extractive limitations.

PTFE Chemical Processing Grade

High chemical resistance polytetrafluoroethylene for lining reactors and tanks. Pure resin form qualifies under HTS 3904.61.00 fluoropolymer heading.

High-Bulk Density PTFE

Polytetrafluoroethylene resin with engineered high bulk density (0.8+ g/cc) for automated molding. Pure PTFE composition qualifies under HTS 3904.61.00 primary polymer provisions.

PTFE for Electrical Insulation

Low dielectric loss polytetrafluoroethylene resin for wire insulation extrusion. Meets HTS 3904.61.00 as ≥95% pure PTFE monomer in primary form.

PTFE Aerospace Grade Resin

Polytetrafluoroethylene meeting aerospace specifications (AMS 3660) for seals and bearings. HTS 3904.61.00 classification as specification-grade pure PTFE polymer.

Virgin Polytetrafluoroethylene Resin

Pure polytetrafluoroethylene (PTFE) resin in granular form, consisting of 100% PTFE monomer units, used as a base material for molding into sheets, rods, or other shapes. It falls under HTS 3904.61.00 as it meets the 'poly' prefix requirement of 95% or more PTFE content by weight in primary form.