Impact-Modified MBS Polymer Granules
Granular primary form of MBS copolymer designed for high-impact applications, meeting the 95% weight threshold for methyl methacrylate-butadiene-styrene comonomers. Classified specifically under 3903.90.1000 due to the named copolymer designation in the HTS. Commonly added to PVC for clear, tough profiles like window frames.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 6.5% | +35.0% | 41.5% |
| 🇲🇽Mexico | 6.5% | +10.0% | 16.5% |
| 🇨🇦Canada | 6.5% | +10.0% | 16.5% |
| 🇩🇪Germany | 6.5% | +10.0% | 16.5% |
| 🇯🇵Japan | 6.5% | +10.0% | 16.5% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If butadiene content predominates over styrene
Classification follows predominant monomer unit per subheading note (a)(4); high-butadiene content shifts to ethylene-butadiene copolymers in 3901.
If for retail packaging exceeding primary form criteria
Small retail-packed polymers may fall under Chapter 39 heading 3907 for aromatic polyacetals or other specified polymers if not strictly industrial primary form.
If dissolved in solvent as liquid dispersion
Solvent-based polymer solutions are often classified as petroleum-derived preparations in 2710 rather than solid primary polymers.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include FTIR or NMR analysis certificates proving MBS composition; ensure granules average under 5mm to qualify as primary forms
• Avoid declaring with PVC masterbatch to prevent classification as compound under 3904
• Common pitfall: undervaluation based on commodity resin benchmarks
Related Products under HTS 3903.90.10.00
MBS Copolymer Resin Pellets
Transparent pellets of methyl methacrylate-butadiene-styrene (MBS) copolymer, where the comonomer units of methyl methacrylate, butadiene, and styrene contribute 95% or more by weight of the total polymer content. This specific copolymer is classified under HTS 3903.90.1000 as it falls within the named subheading for MBS copolymers in primary forms. Used primarily as an impact modifier for rigid PVC in manufacturing.
Clear MBS Copolymer Beads for PVC Toughening
High-clarity MBS copolymer beads in primary form, with precise 95%+ comonomer composition of methyl methacrylate, butadiene, and styrene. This material is explicitly named in subheading 3903.90.1000 for import classification. Essential for producing transparent, impact-resistant PVC sheets and films.
MBS Impact Modifier Powder (Core-Shell Type)
Fine powder form of core-shell MBS copolymer where butadiene core is rubber-modified with MMA/styrene shell, meeting 95% comonomer criteria. Classified under the specific MBS subheading 3903.90.1000 in primary forms. Used in extrusion and injection molding for enhanced toughness.
High-Impact MBS Copolymer for Medical PVC
Phthalate-free MBS copolymer pellets optimized for medical-grade PVC applications, with verified 95%+ named comonomer content. Falls squarely under HTS 3903.90.1000 as named styrene copolymer in primary form. Provides clarity and impact resistance for IV bags and tubing.