Levapren 800 HV Vinyl Chloride-Vinyl Acetate-Ethylene Terpolymer
Levapren 800 HV is a terpolymer resin of vinyl chloride, vinyl acetate (<50% derivatives), and ethylene in primary pellet form, designed for cable insulation and flooring compounds. It meets HTS 3901.30.20.00 as a specific terpolymer with required weight percentages and no aromatic modification. Used in wire coatings for flexibility and durability.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If vinyl chloride monomer predominates by weight
Per subheading note (a)(4), classification follows the predominant monomer; VC-dominant terpolymers go to 'other' vinyl chloride polymers.
If polyethylene-like with minimal comonomers
If ethylene exceeds 95% with trace comonomers, it qualifies as polyethylene under 3901.10 per note (a)(1).
If imported as petroleum sulfonate blend
Polymer blends not meeting pure terpolymer criteria may classify as additives for rubber/plastics.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Obtain detailed FTIR or NMR analysis reports proving terpolymer ratios to avoid reclassification
• Declare as primary form only if not compounded
• Pitfall: blending with fillers may push into Chapter 39 plates/sheets (3920)
Related Products under HTS 3901.30.20.00
Elvax 40L-03 Ethylene-Vinyl Acetate-Vinyl Chloride Terpolymer Resin
Elvax 40L-03 is a low-viscosity terpolymer resin composed of ethylene, vinyl acetate (under 50% by weight), and vinyl chloride, excluding aromatic monomers. It is used in hot-melt adhesives and sealants for packaging applications. Classified under HTS 3901.30.20.00 due to its specific terpolymer composition meeting the subheading note criteria for 95%+ comonomer contribution.
Vinnapas B 60 VF Terpolymer Emulsion Resin (Dry Powder Form)
Vinnapas B 60 VF is a spray-dried powder from vinyl acetate-vinyl chloride-ethylene terpolymer dispersion, with <50% VA derivatives, used in tile adhesives and renders. Classified in primary form under HTS 3901.30.20.00 as the polymer meets exact comonomer specs without aromatic influence. Provides water resistance in construction coatings.
Ultrathene UE 649-02 Low-Density Terpolymer Pellets
Ultrathene UE 649-02 consists of ethylene-vinyl acetate-vinyl chloride terpolymer pellets for extrusion into films and foams, with VA derivatives <50% by weight. Excludes aromatic monomers, fitting HTS 3901.30.20.00 precisely per chapter notes. Applied in flexible packaging and medical tubing.
Interpolymer VX550F Terpolymer for Footwear Soles
VX550F is a specialty terpolymer of vinyl acetate (<50%), vinyl chloride, and ethylene in granular form for compounding into shoe soling and conveyor belts. Meets HTS 3901.30.20.00 with exact monomer limits and no aromatic derivation. Enhances abrasion resistance in rubber blends.
Synthomer Vycar 460x90A Terpolymer Latex Powder
Synthomer Vycar 460x90A is a redispersible powder from VA-VC-ethylene terpolymer emulsion (<50% VA), used in cementitious adhesives and repair mortars. Primary form classification under HTS 3901.30.20.00 based on polymer content and subheading notes. Improves adhesion in construction.
DuPont Elvax 4355 Terpolymer Blend Pellets
Elvax 4355 pellets feature ethylene-vinyl acetate-vinyl chloride terpolymer with VA <50%, for injection molding of gaskets and profiles. HTS 3901.30.20.00 applies due to predominant ethylene and specific comonomer compliance. Offers good flexibility and chemical resistance.