TotalEnergies HDPE 2003AN
TotalEnergies HDPE 2003AN is a high-density polyethylene blow molding grade with specific gravity 0.953 for chemical drums. HTS 3901.20.5000 as qualifying 'Other' polyethylene ≥0.94 density primary form.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If lower density polyethylene grades
Spec grav <0.94 threshold separates LDPE from HDPE subheadings
If polyvinyl acetate polymers
Vinyl acetate polymers classify under separate heading 3905
If in sheet/film form >38.1cm width
US note limits Free (B) rate; larger sheets go to plates/sheets heading
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide density gradient column test results; confirm homopolymer status; avoid bulk packaging confusion with 3923 articles
Related Products under HTS 3901.20.50.00
High-Density Polyethylene HDPE 5502
HDPE 5502 is a high-density polyethylene resin with a specific gravity of 0.954, produced via Ziegler-Natta polymerization for blow molding and extrusion applications. It meets HTS 3901.20.5000 as a polyethylene polymer where the ethylene monomer units contribute over 95% by weight, with specific gravity 0.94 or more, classified under 'Other' in the series.
HDPE M6000 Blow Molding Resin
HDPE M6000 is a bimodal high-density polyethylene resin with specific gravity 0.954, designed for large blow molded containers like drums and bottles. Classified in HTS 3901.20.5000 as it qualifies as polyethylene with spec grav ≥0.94 and ethylene units predominating over 95% by weight.
RigidEX HD5218EA Pellets
RigidEX HD5218EA is a high-density polyethylene homopolymer resin with specific gravity 0.952, supplied in pellet form for injection molding of industrial containers. Falls under HTS 3901.20.5000 as 'Other' polyethylene with spec grav ≥0.94 meeting the 95% ethylene monomer requirement.
Alathon H5218 High Density PE
Alathon H5218 is a high molecular weight high-density polyethylene resin, specific gravity 0.953, used for film and sheet extrusion. HTS 3901.20.5000 applies as polyethylene ≥0.94 spec grav in primary pellet form with ≥95% ethylene content.
Marlex HHM TR-144 HDPE
Marlex HHM TR-144 is a high-density polyethylene blow molding resin with specific gravity 0.958, featuring excellent environmental stress crack resistance. Classified HTS 3901.20.5000 as qualifying polyethylene ≥0.94 density in 'Other' category.
SABIC HDPE BM1052 Pellets
SABIC HDPE BM1052 is a high-density polyethylene resin specific gravity 0.952 for blow molded bottles and containers. Meets HTS 3901.20.5000 criteria as ethylene polymer spec grav ≥0.94 with predominant ethylene monomer content.