LDPE Injection Molding Grade MI 2.0
LDPE pellets for injection molding applications like bottle caps, with melt index 2.0 and density 0.925. Falls under HTS 3901.10.5020 as low density, non-linear polyethylene in primary form with predominant ethylene monomer. Offers good flow and impact resistance.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If contains linear comonomers like 1-butene
LLDPE distinguished by short-chain branching from alpha-olefin comonomers, explicitly separated from branched LDPE.
If copolymerized with propylene >5%
Predominant monomer shifts classification to polymers of propylene if propylene exceeds ethylene by weight.
If chemically modified with antioxidants
Subheading note (a)(3) places chemically modified polymers in 'Other' if not specifically provided, but for ethylene series it's 3901.10.50.50.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document exact melt flow rate and density via ASTM D1238/D1505 tests
• Declare as 'primary form' only if unprocessed pellets
• Common pitfall: classifying compounded resins with >5% fillers as 3901.90
Related Products under HTS 3901.10.50.20
Low Density Polyethylene Resin LDPE 0025
This is a standard low density polyethylene (LDPE) resin with a melt index of 25 g/10 min and specific gravity below 0.94, excluding linear variants. It meets HTS 3901.10.5020 as it is a polyethylene polymer where ethylene monomer units contribute over 95% by weight. Primarily used in film blowing for plastic bags and packaging.
LDPE Film Grade Resin 0.922 Density
Film-grade LDPE resin designed for blown film extrusion, with density 0.922 g/cm³ and high clarity. Classified under 3901.10.5020 as pure LDPE (non-LLDPE) in primary pellet form, ethylene >95% by weight. Ideal for grocery bags and shrink wrap.
Branched LDPE Extrusion Grade for Pipes
Traditional branched LDPE resin for pipe extrusion, density 0.918, used in flexible tubing. HTS 3901.10.5020 applies to this non-linear LDPE primary form where ethylene constitutes 95%+ by weight. Distinguished from LLDPE by high-pressure polymerization process.
High Clarity LDPE Resin for Packaging
Premium LDPE with additives for optical clarity in food packaging films, specific gravity 0.919. Classified 3901.10.5020 as it remains primary form LDPE (non-LLDPE, ethylene >95%). Not chemically modified beyond stabilization.
LDPE Blow Molding Grade for Bottles
LDPE resin optimized for blow molding squeeze bottles, density 0.930, melt index 0.8. HTS 3901.10.5020 for this classic high-pressure LDPE excluding linear types, primary pellet form.
Standard LDPE Pellets 0.923 SG
General-purpose LDPE pellets density 0.923 g/cm³ for various extrusion processes. Primary form polymer under 3901.10.5020: low density, excludes LLDPE, ethylene monomer >95% weight.