Epoxy Coating Solvent Blend

Specialty composite thinner for 100% solids epoxy coatings and high-build epoxy paints used in corrosion protection. HTS 3814.00.50 as organic thinner nesoi. Slow-evaporating for proper film formation.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China6%+35.0%41%
🇲🇽Mexico6%+10.0%16%
🇨🇦Canada6%+10.0%16%
🇩🇪Germany6%+10.0%16%
🇯🇵Japan6%+10.0%16%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

3907.30.00.00Higher: 41.1% vs 41%

If pre-dissolved epoxy resins

Epoxy resins in primary forms/solutions under Chapter 39

2710.12.15Lower: 25% vs 41%

If high aromatic petroleum content

Petroleum distillates classification under Chapter 27

3824.99Lower: 15% vs 41%

If industrial coating preparations

Specialty chemical preparations nesoi

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Document epoxy compatibility testing; comply with SSPC standards

High flash point allows easier shipping

Verify not classifiable as epoxy resin solution

Related Products under HTS 3814.00.50

Acetone-Based Paint Thinner

A composite solvent blend primarily containing acetone mixed with other organic solvents for thinning oil-based paints and varnishes. It falls under HTS 3814.00.50 as an organic composite solvent and thinner not elsewhere specified, designed for paint application preparation. This product is commonly used by professional painters to adjust paint viscosity.

Toluene-Xylene Paint Solvent Blend

A mixed organic solvent containing toluene and xylene for thinning enamels and lacquers in industrial painting operations. Classified under HTS 3814.00.50 as 'other' composite solvents not specified elsewhere. Essential for achieving proper flow and leveling in high-performance coatings.

MIBK-MEK Lacquer Thinner

Composite thinner made from methyl isobutyl ketone (MIBK) and methyl ethyl ketone (MEK) for nitrocellulose lacquers. HTS 3814.00.50 covers this as an organic composite solvent specifically prepared for varnish thinning. Used in automotive refinishing and wood finishing.

Professional Graffiti Remover Solvent

Organic composite solvent blend containing methylene chloride alternatives for removing spray paint graffiti from surfaces. Falls under HTS 3814.00.50 as prepared paint remover 'other' category. Formulated for municipal and property maintenance use.

Aerospace Paint Stripper Solution

High-performance organic solvent composite for stripping aircraft paint systems without damaging aluminum substrates. HTS 3814.00.50 classification for specialized prepared paint removers. Meets aerospace specifications like MIL-R-81294.

Marine Varnish Remover

Composite organic solvent specifically formulated to remove weathered marine varnishes from boat hulls and decks. Classified HTS 3814.00.50 as prepared varnish remover for harsh saltwater environments. Contains corrosion inhibitors for fiberglass and wood.