Plaster Filler Compound for Wall Painting
A ready-mixed plaster-based filler used by painters to smooth drywall joints and surface imperfections prior to wall painting. It provides a non-refractory surfacing preparation for indoor walls, fitting HTS 3214.10.00.90 as painters' fillings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If classified as caulking compounds
Caulking compounds for sealing joints fall under a separate subheading within 3214.10.
If primarily cement-based for construction
Portland cement clinkers or compositions for building use are in Chapter 25, not Chapter 32 mastics.
If chemically defined non-refractory mortar
Chapter notes exclude chemically defined compounds; may go to Chapter 38 for prepared binders.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include usage instructions confirming application for painting preparation, not as finished plaster
• Check for VOC compliance in destination country; provide emission test reports if required
Related Products under HTS 3214.10.00.90
Ready-Mixed Painter's Bog for Exterior Siding
Pre-mixed bog compound for painters filling gaps in exterior wood siding before weatherproof painting. Designed as a nonrefractory surfacing mastic, it falls under HTS 3214.10.00.90 as painters' fillings.
Automotive Body Filler Putty
Two-part polyester body filler putty used by painters for dent repair and surface leveling before automotive painting. As a nonrefractory surfacing preparation, it is HTS 3214.10.00.90 painters' fillings.
Wood Filler Putty for Painters
A solvent-based wood filler putty designed for painters to fill cracks, holes, and imperfections in wooden surfaces before painting. It hardens to a sandable consistency matching wood grain, classified under HTS 3214.10.00.90 as painters' fillings for surface preparation in painting applications.
Spackling Paste for Trim and Moldings
Lightweight spackling paste formulated for painters to repair and fill nail holes in wood trim and decorative moldings before priming and painting. As a nonrefractory surfacing preparation for indoor surfaces, it is classified in HTS 3214.10.00.90 as painters' fillings.
Acrylic Wall Surfacer Filler
An acrylic-based filler paste used by painters as a surfacer to level and fill minor cracks on interior walls for optimal paint adhesion. It qualifies as painters' fillings under HTS 3214.10.00.90 for nonrefractory indoor wall preparations.
Lightweight Drywall Joint Compound
All-purpose lightweight compound for painters to tape and finish drywall joints, creating smooth surfaces for painting. Classified as painters' fillings in HTS 3214.10.00.90 for indoor wall surfacing.