Share:|Follow us on LinkedIn

Toluene Diisocyanate (TDI) 80/20

TDI 80/20 is an 80% 2,4-TDI and 20% 2,6-TDI isomer mix, a chemically defined isocyanate for flexible foams. HTS 2929.10.55.00 covers it as listed in U.S. note 3 to section VI.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China6.5%+35.0%41.5%
🇲🇽Mexico6.5%+10.0%16.5%
🇨🇦Canada6.5%+10.0%16.5%
🇩🇪Germany6.5%+10.0%16.5%
🇯🇵Japan6.5%+10.0%16.5%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

2929.10Same rate: 41.5%

If pure isomer form

Single isomers may not qualify for note 3 specific products.

3824.99Lower: 15% vs 41.5%

If diluted for safety transport

Solvent-diluted per note 1(e) if for transport only, but mixtures heading if specific use.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Get AI-powered classificationCalculate exact duty

Import Tips & Compliance

• Isomer ratio certification required; highly reactive—avoid moisture exposure

• Watch for TSCA registration needs

Related Products under HTS 2929.10.55.00

Methylene Diphenyl Diisocyanate (MDI)

MDI is a chemically defined aromatic diisocyanate used primarily in polyurethane production for foams and coatings. It falls under HTS 2929.10.55.00 as an isocyanate specifically listed in additional U.S. note 3 to section VI, distinguishing it from other isocyanates.

Polymeric Methylene Diphenyl Diisocyanate (PMDI)

PMDI is a mixture of MDI oligomers, a chemically defined isocyanate for rigid polyurethane foams in insulation. Classified under HTS 2929.10.55.00 per additional U.S. note 3 to section VI for specific isocyanates.

Carbodiimide Stabilized MDI

This MDI variant includes carbodiimide stabilizer for extended shelf life, remaining a chemically defined isocyanate. It qualifies for HTS 2929.10.55.00 under U.S. note 3 as a listed product with necessary preservative.

Prepolymeric MDI Isocyanate

Prepolymeric MDI is a low-viscosity isocyanate prepolymer for flexible foam production, chemically defined under chapter scope. HTS 2929.10.55.00 applies due to its inclusion in additional U.S. note 3.

Modified Diphenylmethane Diisocyanate (Modified MDI)

Modified MDI features altered functionality for coatings and adhesives, still a core isocyanate per chapter notes. It is classified in HTS 2929.10.55.00 as a product described in U.S. note 3 to section VI.

Crude MDI

Crude MDI contains oligomeric impurities but remains a chemically defined diisocyanate for industrial use. Falls under HTS 2929.10.55.00 per additional U.S. note 3, allowing impurities as per chapter note 1(a).