API Separator Sludge Oil
Hydrocarbon sludge recovered from API oil-water separators in refineries, residue of petroleum processing. Falls under HTS 2713.90.00.00 as other petroleum oil residues. Reprocessed for fuel or asphalt blending.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | Free | +25.0% | 25% |
| 🇲🇽Mexico | Free | — | Free |
| 🇨🇦Canada | Free | — | Free |
| 🇩🇪Germany | Free | — | Free |
| 🇯🇵Japan | Free | — | Free |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If petroleum coke dust predominant
Coke fines from separators classified as petroleum coke.
If lubricating oil emulsions
Lube oil/water emulsions may fall under Chapter 34 if lubricant base.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include separator efficiency reports showing oil recovery rates
• Test for heavy metals; elevated levels require RCRA waste determination
• Use nitrogen blanketing for storage to prevent autoignition
Related Products under HTS 2713.90.00.00
Petroleum Refinery Slop Oil
Slop oil is a residual petroleum product recovered from refinery wastewater treatment processes, containing hydrocarbons from petroleum oils. It falls under HTS 2713.90.00.00 as a residue of petroleum oils not suitable for direct fuel use without further processing. This heavy, contaminated oil is typically reprocessed for recovery of valuable components.
Clarified Sludge Oil from Tank Bottoms
Tank bottom sludge is the heavy sediment accumulated in petroleum storage tanks, clarified to recover oil residues from bituminous materials. Classified under HTS 2713.90.00.00 as it represents unprocessed residues unsuitable for immediate use. Used primarily in asphalt production or as fuel oil feedstock.
Heavy Fuel Oil Tank Residue
Residue remaining in tanks after heavy fuel oil (HFO) drainage, consisting of petroleum oil bottoms from bituminous sources. Falls under HTS 2713.90.00.00 as 'other residues' too viscous for standard fuel use. Commonly blended into lower-grade bunker fuels.
Asphalt Flux Residue
Residue from vacuum distillation towers used as asphalt flux feedstock, derived from petroleum oils or bituminous materials. HTS 2713.90.00.00 applies to these unrefined heavy ends before fluxing. Essential for road paving asphalt production.
Petroleum Desalter Brine Sludge
Emulsion-breaking sludge from crude oil desalters, containing petroleum oil residues emulsified with brine. Classified in HTS 2713.90.00.00 as residues of petroleum oils from bituminous minerals. Recovered for oil reclamation before disposal.
Vacuum Residuum from Crude Distillation
Bottoms product from vacuum crude distillation units, the heaviest residue of petroleum oils. HTS 2713.90.00.00 covers this material before coking or further processing. Primary feedstock for coker units and heavy fuel production.