Used Cutting Oil Emulsion

Water-mixed waste oil from metal machining operations, separated for oil recovery. Qualifies under 2710.99.90.00 as waste oils with petroleum base exceeding 70% by weight.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳China7%+7.5%14.5%
🇲🇽Mexico7%—7%
🇨🇦Canada7%—7%
🇩🇪Germany7%—7%
🇯🇵Japan7%—7%

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

2710.19Higher: 17% vs 14.5%

If recovered for metalworking fluid reuse

Reprocessed cutting oils become preparations n.e.s., not waste.

3403.19Higher: 15.8% vs 14.5%

If primarily lubricant preparations under 70% oil

Lower petroleum content shifts to lubricating preparations heading.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

• Document oil-water separation process to prove >70% petroleum content for classification

• Label as UN 3082 if flash point <60°C; verify with closed cup testing