Used Motor Oil from Automotive Shops

Waste oil collected from drained vehicle engines during oil changes, containing a mixture of hydrocarbons with no single compound exceeding 50% by weight. Classified under HTS 2710.99.4500 as waste oils that are mixtures of hydrocarbons not elsewhere specified, derived from petroleum-based motor oils used in bituminous mineral processing.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+7.5%7.5%
🇲🇽MexicoFreeFree
🇨🇦CanadaFreeFree
🇩🇪GermanyFreeFree
🇯🇵JapanFreeFree

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

2710.19Higher: 17% vs 7.5%

If not classified as waste but as processed petroleum distillates

Cleaned or re-refined oils without waste characteristics fall under other petroleum oil mixtures, not waste oils.

2707.50.00Higher: 25% vs 7.5%

If primarily aromatic hydrocarbon mixtures >50% single compound like naphthalene

Aromatic mixtures meeting subheading 2707 criteria shift to Chapter 27 aromatics heading instead of waste oils.

3825.69.00.00Higher: 35% vs 7.5%

If Mixed with substantial non-oil chemical agents for industrial applications.

Preparations with chemical reaction additives exceed basic petroleum oil threshold, moving to residual chemical products.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Obtain EPA waste generator ID and hazardous waste manifests for all shipments to comply with US environmental import rules

Test oil for hazardous contaminants like heavy metals; levels above thresholds may require special handling or denial of entry

Provide lab analysis confirming <50% single hydrocarbon to avoid reclassification to other 2710 subheadings

Related Products under HTS 2710.99.45.00

Industrial Hydraulic Fluid Waste Oil

Spent hydraulic oil from heavy machinery containing mixed hydrocarbons from petroleum base stocks, with no hydrocarbon exceeding 50% composition. Falls under HTS 2710.99.4500 as waste oils from bituminous minerals, not fitting other specific hydrocarbon mixture categories.

Waste Cutting Oil from Metalworking

Used cutting and grinding oil mixture from machining operations, comprising hydrocarbon blends below 50% any single compound, contaminated with metal fines. HTS 2710.99.4500 covers these as waste oils from petroleum/bituminous sources not specified elsewhere.

Waste Transformer Oil from Electrical Equipment

Degraded insulating oil from power transformers, consisting of mixed petroleum hydrocarbons under 50% single compound limit. Classified in 2710.99.4500 as electrical equipment waste oils meeting the hydrocarbon mixture criteria.

Spent Fuel Oil from Heating Systems

Contaminated No. 2 fuel oil residue from residential/commercial boilers, hydrocarbon blend with <50% single compound. HTS 2710.99.4500 applies to such waste fuel oils from bituminous minerals.

Waste Gear Lubricant from Industrial Gearboxes

Drained EP gear oil from manufacturing gearboxes, mixed hydrocarbons not exceeding 50% of any one compound. Fits 2710.99.4500 waste oil category for unspecific hydrocarbon mixtures.

Contaminated Compressor Oil Waste

Oxidized oil from air compressors containing hydrocarbon mixtures below 50% single compound threshold. HTS 2710.99.4500 designates these as other waste oils from bituminous mineral sources.