Spent Industrial Gearbox Grease
Waste grease from heavy industrial gearboxes in manufacturing plants, with thickeners from palm oil fatty acids below 10% by weight. Classified under HTS 2710.99.32.00 due to its origin as discarded lubricating grease meeting the low salt content criterion. It is contaminated with metal fines from gear wear.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from anti-friction metal grease wastes
Grease wastes containing anti-friction metals like copper/lead have dedicated subheading regardless of salt content.
If aromatic extract residues dominate
Waste oils rich in aromatic compounds from lube refining shift to Chapter 27 coal tar distillates.
If prepared as grease-cutting residual waste
Wastes from chemical preparation of lubricants not fitting petroleum oil basic constitution go to Chapter 38.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include generator certificates and chemical assays for salt composition; check Basel Convention rules for transboundary waste movement
• Avoid classifying fresh grease as waste
Related Products under HTS 2710.99.32.00
Waste Marine Grease from Ship Engine Bearings
This is waste grease collected from the bearings of marine diesel engines, containing minor soap thickeners from vegetable fatty acids under 10% by weight. It qualifies under HTS 2710.99.32.00 as a waste of lubricating greases with low fatty acid salt content derived from used marine equipment. The material is a spent lubricant no longer suitable for its original purpose.
Discarded Vegetable-Based Spindle Grease
Waste from high-speed textile spindles lubricated with vegetable-derived greases having under 10% fatty acid salts by weight. Falls under HTS 2710.99.32.00 as waste grease from bituminous mineral oil preparations with minimal soap content. Typically contaminated with fiber residues.
Waste Lithium Complex Grease from Mining Equipment
Spent grease from heavy mining haul trucks and crushers, using lithium soaps from tallow under 10% by weight in petroleum base. HTS 2710.99.32.00 applies to this waste of lubricating greases with controlled fatty acid salt levels. Contains abrasives from rock dust.
Used Polyurea Grease from Electric Motor Housings
Waste grease recovered from sealed electric motors in appliances, with polyurea thickeners including <10% vegetable fatty acid components. Meets HTS 2710.99.32.00 for low-salt content waste greases based on ≥70% petroleum oils. Often discolored from overheating.
Contaminated Food Machinery Grease Waste
Waste grease from conveyor bearings in food processing plants, vegetable-based soaps ≤10% in mineral oil carrier. HTS 2710.99.32.00 covers this as waste lubricating grease unfit for reuse due to contamination. Requires special handling for incidental food contact history.
Spent Wind Turbine Gearbox Grease
Discarded grease from offshore wind turbine gearboxes, synthetic base with minimal animal fat salts under 10%. Fits HTS 2710.99.32.00 as waste of specified low-salt lubricating greases from bituminous minerals. High water content from environmental exposure.