White Mineral Oil for Plastics Processing
Process oil used as external lubricant in PVC and rubber compounding. Classifies under HTS 2710.19.45.40 as white mineral oil - mixture of hydrocarbons ≤50% single compound, other than crude or biodiesel-containing. Low volatility for high-temperature processing.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If heat treated or fluxed
Heat-treated mineral oils have separate 'other' classification.
If when used as rubber/plastics chemical additive preparation
Preparations for rubber/plastics with specific function classify in 3819.
If surface-active properties predominate
Oils with significant surfactant function move to Chapter 34.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide PMN (Premanufacture Notice) status under TSCA for new formulations
• Specify carbon number range (C20-C50 typical) to confirm white mineral oil specs
• Use steel drums (barrel = 158.98L at 15.6°C) for accurate duty calculation
Related Products under HTS 2710.19.45.40
USP White Mineral Oil
A highly refined, colorless, odorless white mineral oil meeting United States Pharmacopeia (USP) standards for purity. Classified under HTS 2710.19.45.40 as it is a mixture of hydrocarbons containing by weight not over 50 percent of any single hydrocarbon compound, specifically white mineral oil not elsewhere specified. Used primarily in pharmaceuticals, cosmetics, and food processing as a lubricant or carrier.
Technical Grade White Mineral Oil
Refined white mineral oil used in industrial applications like plastics processing and metalworking. Meets HTS 2710.19.45.40 criteria as a hydrocarbon mixture with no single compound over 50% by weight, classified as 'other' white mineral oil. Non-toxic and stable for use as a process aid.
Food Grade White Mineral Oil NF
National Formulary (NF) grade white mineral oil approved for food contact applications like release agents in baking. Falls under HTS 2710.19.45.40 as white mineral oil being a mixture of hydrocarbons not exceeding 50% of any single compound. Highly purified to remove impurities.
Cosmetic Grade White Mineral Oil
Ultra-pure white mineral oil used as an emollient in lotions, creams, and baby oils. Classified in HTS 2710.19.45.40 due to its composition as white mineral oil - a mixture where no single hydrocarbon exceeds 50% by weight. Free of impurities for direct skin contact.
Industrial White Mineral Oil 70W
White mineral oil with 70 Saybolt Universal viscosity at 37.8°C for industrial release agents and textile machinery. HTS 2710.19.45.40 applies as 'other' white mineral oil - hydrocarbon mixture not over 50% single compound, not crude or waste. Colorless and thermally stable.
Pharmaceutical Grade Mineral Oil
Sterile-filtered white mineral oil for pharmaceutical applications like capsule fillers and ointments. Meets strict HTS 2710.19.45.40 definition as other white mineral oil - purified hydrocarbon mixture without dominant single compound. USP/EP compliant.