Molybdenum Disulfide Grease
EP grease fortified with MoS2 solid lubricant and 78% petroleum base for mining equipment gears. Classified under 2710.19.40.00 as other greases with predominant petroleum oils. Handles extreme pressure without seizing.
Import Duty Rates by Country of Origin
| Origin Country | MFN Rate | Ch.99 Surcharges | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 5.7% | +25.0% | 30.7% |
| 🇲🇽Mexico | 5.7% | — | 5.7% |
| 🇨🇦Canada | 5.7% | — | 5.7% |
| 🇩🇪Germany | 5.7% | — | 5.7% |
| 🇯🇵Japan | 5.7% | — | 5.7% |
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If solid additives exceed 30% by weight
Solid lubricant-dominant products classified as preparations, not petroleum greases.
If packaged as multi-purpose hydraulic oil/grease combo
Hybrids without clear grease consistency go to catch-all 'other' oils.
If small-quantity cartridges for DIY retail
Retail form factor separates from bulk industrial greases.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Document MoS2 content <10% to keep petroleum as basic constituent; higher shifts classification
• Hazmat declaration required for flash point <200°F; non-compliance delays entry
• Use ISPM-15 certified pallets for wood packaging to avoid fumigation holds
Related Products under HTS 2710.19.40.00
Lithium Complex Grease
A high-performance lithium complex grease containing over 70% petroleum oils as the base, used for heavy-duty industrial lubrication in bearings and gears. It falls under HTS 2710.19.40.00 as a grease with petroleum oils as the basic constituent, not elsewhere specified. The 'other' category covers this non-specific formulation beyond basic types.
Calcium Sulfonate Grease
Marine-grade calcium sulfonate grease with 75%+ refined petroleum base oil, offering rust protection and water resistance for ship engines and offshore equipment. Classified in 2710.19.40.00 as 'other' greases where petroleum oils are the basic constituent. Meets the 70% threshold for petroleum-derived products.
Polyurea Grease
Synthetic polyurea-thickened grease using 80% petroleum oil base for high-temperature electric motor applications. Falls under HTS 2710.19.40.00 as 'other' lubricating greases with petroleum as the primary constituent. Excludes crude, biodiesel, and waste oils per heading scope.
Bentonite Clay Grease
Non-soap bentonite clay grease with 74% mineral base oil for high-temperature kiln applications. HTS 2710.19.40.00 applies to these 'other' greases where petroleum/bituminous oils form the base. Stable to 600°F.
Food-Grade Aluminum Grease
NSF H1 certified aluminum complex grease with 71% USP white mineral oil for food processing conveyors. Falls in 2710.19.40.00 as other greases (note: not excluded retail skin care per US note). Meets incidental contact standards.
High-Temp Silicone Grease
Silicone-filled petroleum grease (73% base oil) for oven door seals and bakery equipment. 2710.19.40.00 covers as other grease with petroleum dominant. Dielectric and waterproof.