Light Marine Fuel Oil High Sulfur
Blended light fuel oil for marine auxiliary engines, API ≥25°, viscosity <45 SUS at 37.8°C, sulfur >500 ppm. Fits HTS 2710.19.11.14 as distillate fuel oil with petroleum oils ≥70% by weight.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If containing biodiesel
Any biodiesel blend excludes from 2710.19.11 and moves per chapter biodiesel note.
If blended with >30% residual components
Heavy blends testing as residual fuel oils classify under 2710.19.25.
If <70% petroleum oil content
Preparations with lower petroleum oil basic constituents fall to residual 2710.99.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Comply with MARPOL Annex VI sulfur regs for destination ports, even if product meets HTS sulfur threshold
• Submit bunker delivery notes and tank sounding reports as supporting import documentation
• Test for residual oil content to avoid reclassification as residual fuel under 2710.19.25
Related Products under HTS 2710.19.11.14
No. 2 Heating Oil High Sulfur
A light distillate fuel oil used primarily for residential and commercial heating, testing 25 degrees A.P.I. or more with Saybolt Universal viscosity at 37.8°C less than 45 seconds, and containing over 500 ppm sulfur. It falls under HTS 2710.19.11.14 due to its classification as a high-sulfur light fuel oil derived from petroleum, not crude, and meeting the specific viscosity and API gravity criteria.
High Sulfur Kerosene Fuel
Kerosene-grade petroleum distillate for heating or industrial burners, with >25° API, <45 SUS viscosity at 37.8°C, and sulfur >500 ppm. Classified under HTS 2710.19.11.14 as a light fuel oil preparation containing 70%+ petroleum oils as basic constituents.
Industrial Boiler Light Fuel Oil >500 ppm S
Distillate fuel for factory boilers and process heating, meeting light fuel oil specs: ≥25° API, <45 SUS @37.8°C, sulfur >500 ppm. HTS 2710.19.11.14 covers these petroleum-based heating oils.
High Sulfur Range Oil
Light petroleum distillate for home oil burners and ranges, API 25°+, viscosity <45 SUS, sulfur exceeding 500 ppm. Properly classified in HTS 2710.19.11.14 as non-crude light fuel oil.
Blended High Sulfur Light Bunker Fuel
Mixture of straight-run distillates for ship bunkering, ≥70% petroleum oils, light specs with >500 ppm sulfur. HTS 2710.19.11.14 applies to such blended light fuel oils.
High Sulfur Lamp Oil
Petroleum distillate for outdoor lamps and torches, light viscosity <45 SUS, API >25°, sulfur >500 ppm. Falls under HTS 2710.19.11.14 as light fuel oil preparation.