Blended Low Sulfur Distillate Fuel 100 ppm S
Blended petroleum distillate fuel oil with exactly 100 ppm sulfur, light specs (API 27°, visc 35 SUS), >70% base oils. Under HTS 2710.19.11.13 for low-sulfur light fuel oils excluding biodiesel/waste. Used in agriculture, construction off-road equipment.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sulfur over 500 ppm to 2000 ppm
Medium sulfur range for light fuels has separate tracking subheading.
If containing biodiesel esters
Any biodiesel content excludes from pure petroleum and uses dedicated biofuel heading.
If aromatic content >50% benzene/toluene
High aromatic hydrocarbons classify as specific aromatics under 2707, not general fuels.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Blend sheets must detail petroleum ratio >70%; under that, reclassifies
• Cloud point testing for cold weather performance in northern imports
• Customs requires density at 15°C measurement for verification
Related Products under HTS 2710.19.11.13
Ultra-Low Sulfur Diesel Fuel (15-500 ppm)
This is a light distillate fuel oil refined from petroleum, testing 25 degrees A.P.I. or more with Saybolt Universal viscosity at 37.8°C less than 45 seconds, containing 15-500 ppm sulfur. It meets HTS 2710.19.11.13 specifications for low-sulfur light fuel oils used primarily in on-road diesel engines and compliant machinery. The classification applies due to its petroleum base exceeding 70% oil content and precise sulfur limits.
Low Sulfur Marine Gas Oil (MGO) 0.1% S
Marine gas oil with sulfur between 15-500 ppm (0.1% max), light distillate fuel for marine auxiliary engines, API gravity 25+ and viscosity <45 SUS at 37.8°C. Classified under HTS 2710.19.11.13 as it fits low-sulfur light fuel oil specs from petroleum refining. Used in vessels compliant with IMO 2020 sulfur cap.
No. 2 Low Sulfur Heating Oil (15-500 ppm)
Distillate heating oil equivalent to No. 2 fuel with sulfur 15-500 ppm, API 25+, viscosity <45 SUS at 37.8°C, over 70% petroleum oils. Falls under HTS 2710.19.11.13 for light residual/distillate fuel oils used in residential and commercial boilers. Refined to meet regional ultra-low sulfur standards.
Industrial Low Sulfur Fuel Oil for Generators
Light fuel oil for diesel generators and industrial burners, sulfur 20-400 ppm, 30° API gravity, <40 SUS viscosity, petroleum >70%. HTS 2710.19.11.13 applies to this non-crude distillate with specified sulfur and physical properties. Common in backup power systems and manufacturing.