Low-Sulfur Marine Gas Oil (MGO)
LS-MGO is a distillate marine fuel with ≤15 ppm sulfur for compliant vessels in Emission Control Areas, matching light fuel oil specs in 2710.19.11.11. High A.P.I. and low viscosity suit auxiliary engines.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If specifically labeled for marine propulsion
Narrower marine distillate subheading applies to propulsion fuels.
If residual components exceed light specs
Blended heavy/light oils classify as residual if viscosity higher.
If further distilled to chemical purity
High-purity distillates become cyclic hydrocarbons nesoi.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide ISO 8217 bunker fuel analysis confirming sulfur and viscosity
• Separate from high-sulfur MGO to avoid blending penalties under MARPOL
• Declare vessel end-use for accurate classification
Related Products under HTS 2710.19.11.11
Ultra-Low Sulfur Diesel Fuel (ULSD)
ULSD is a light distillate fuel oil refined from petroleum with a sulfur content not exceeding 15 ppm, meeting strict environmental regulations for on-road diesel engines. It tests 25 degrees A.P.I. or more and has a Saybolt Universal viscosity at 37.8°C of less than 45 seconds, classifying it under HTS 2710.19.11.11 as a light fuel oil.
No. 1-D Diesel Fuel
No. 1-D is a premium light distillate diesel with ≤15 ppm sulfur, used in cold weather for better flow properties in trucks and generators. It meets 2710.19.11.11 criteria with A.P.I. ≥25 degrees and low viscosity, distinguishing it from heavier No. 2 grades.
Kerosene Jet-A Fuel
Jet-A is a low-sulfur (≤15 ppm) kerosene-type fuel for commercial aviation, with light viscosity and high A.P.I. gravity per 2710.19.11.11. It's a refined distillate from bituminous minerals used in turbine engines.
Heating Oil No. 1
No. 1 heating oil is an ultra-low sulfur distillate burned in residential furnaces, fitting 2710.19.11.11 with <15 ppm S, low viscosity, and ≥25 A.P.I. Used where cleaner combustion is required.
Premium Off-Road Diesel
Dyed red premium off-road diesel with ≤15 ppm sulfur powers construction equipment, classified under 2710.19.11.11 for its light distillate properties and low emissions.
Light Fuel Oil for Generators
Distillate LFO for standby generators has ≤15 ppm sulfur, low viscosity <45 SUS, and ≥25 A.P.I., per 2710.19.11.11. Ideal for backup power in data centers.