Power Plant Residual Fuel Oil RFO 200
Residual fuel oil RFO 200 for electricity generation turbines, meeting heavy fuel criteria of >125 seconds Saybolt viscosity at 37.8°C and sub-25° API gravity. HTS 2710.19.06.35 covers this as other non-crude, non-biodiesel heavy fuel preparations ≥70% petroleum oils.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If topped crude classifications
Heavy oils from simple distillation of crude may classify differently from processed residuals.
If propane-rich natural gas liquids
Blends exceeding petroleum oil threshold but propane-dominant shift headings.
If biodiesel-blended versions
Any biodiesel content >0% moves to biodiesel-specific subheadings.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Include energy content (calorific value) specs; ensure vanadium/ash content disclosures for equipment protection; apply for EPA fuel marker exemptions if applicable
Related Products under HTS 2710.19.06.35
Heavy Bunker Fuel Oil MGO 380
A heavy fuel oil with a Saybolt Universal viscosity exceeding 125 seconds at 37.8°C and API gravity under 25 degrees, used primarily for marine propulsion in large ships. It falls under HTS 2710.19.06.35 as a distillate and residual fuel oil that is neither crude nor biodiesel-containing, meeting the specific viscosity and gravity criteria for heavy fuel oils.
No. 6 Fuel Oil Residual Blend
Industrial residual fuel oil blending straight-run and cracked residues, with Saybolt viscosity over 125 seconds at 37.8°C and low API gravity under 25 degrees, used for power generation and heating. Classified under HTS 2710.19.06.35 due to its heavy fuel characteristics and >70% petroleum oil content without biodiesel.
Industrial Boiler Heavy Fuel Oil HFO-180
Heavy fuel oil grade HFO-180 for stationary boilers, exhibiting >125 SUS viscosity at 37.8°C and API <25°, derived from petroleum residues. It qualifies for HTS 2710.19.06.35 as 'other' heavy fuel oils not specified elsewhere, containing ≥70% basic petroleum oils.
Marine Heavy Fuel Oil IFO 380 cSt
Intermediate Fuel Oil (IFO) 380 specification for oceangoing vessels, with kinematic viscosity converting to >125 SUS at 37.8°C and API under 25°, blended from residual streams. Falls under HTS 2710.19.06.35 as other heavy distillate/residual fuel oils.
Heavy Asphalt Flux Oil
Petroleum flux oil used in asphalt production, with high viscosity >125 SUS at 37.8°C and low API <25°, serving as a softening agent for bitumen. Classified in HTS 2710.19.06.35 as other heavy fuel oils though primarily industrial intermediate.
Blended Heavy Fuel Oil for Cement Kilns
Custom-blended heavy fuel oil for rotary cement kilns, featuring >125 SUS viscosity/ <25° API from residual and cracked stocks ≥70% petroleum base. HTS 2710.19.06.35 applies to these unspecified heavy fuel oils unfit for lighter classifications.