Stoddard Solvent Dry Cleaning Fluid
High-flash Stoddard solvent used in dry cleaning operations, mixture of hydrocarbons with <50% any single compound and >70% petroleum content. HTS 2710.12.45.95 covers this as light oil preparation not pure hydrocarbons. Distills primarily below 210°C per ASTM D86 equivalent.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If used as lubricating oil base
Lubricating oil basestocks, even light, classify under 2710.19.40 regardless of distillation range.
If surface-active cleaning preparation
Formulations with >10% surfactants for cleaning become Chapter 34 detergent preparations.
If contains oxidation inhibitors
Antiknock or antioxidant additives push classification to fuel additive preparations in 3811.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Flash point >38°C required for domestic transport; document for CBP petroleum classification
• Industrial vs consumer packaging affects entry; retail packs may need different labeling
• Test for sulfur content (<0.01% typical) to avoid environmental import restrictions
Related Products under HTS 2710.12.45.95
Industrial Solvent Mixture C9-C10
A mixture of C9-C10 hydrocarbons used as an industrial solvent in paints and coatings, containing no single hydrocarbon exceeding 50% by weight. It qualifies under HTS 2710.12.45.95 as light oils and preparations with over 70% petroleum oils, specifically mixtures of hydrocarbons not elsewhere specified. The low boiling point ensures it distills within light oil parameters.
White Spirit Type Paint Thinner
A petroleum-derived white spirit used for thinning paints and cleaning brushes, with a complex mixture of aliphatic and aromatic hydrocarbons under 50% of any single compound. Classified in 2710.12.45.95 for light petroleum distillates >70% petroleum oils not pure single hydrocarbons. Meets light oil definition by distilling 90%+ at 210°C.
Naphtha Substitute Cleaning Solvent
Low-aromatic naphtha substitute for degreasing and cleaning in manufacturing, blended hydrocarbons with no component over 50% by weight. Falls under HTS 2710.12.45.95 as 'other' light oil mixtures containing >70% petroleum oils from bituminous minerals. Primarily aliphatic for reduced odor and volatility.
Aromatic-Free Mineral Spirits
Dearomatized mineral spirits for specialty coatings and adhesives, complex hydrocarbon blend under 50% single component. Classified 2710.12.45.95 as light petroleum oil mixture >70% basic constituent. Low aromatics (<1%) for food/pharma grade applications.
Petroleum Extract Degreaser Base
Heavy naphtha extract used as base for industrial degreasers, hydrocarbons mixed <50% each, >70% petroleum oils. HTS 2710.12.45.95 for light oil 'other' mixtures not single compounds. High solvency for grease removal in manufacturing.
Mixed Hydrocarbon Extraction Solvent
Specialty solvent for herbal/botanical extractions, petroleum distillate with balanced C6-C10 hydrocarbons <50% each. 2710.12.45.95 classification for light oil mixtures >70% petroleum not biodiesel or waste. Food-grade capable with low impurities.