C5 Raffinate Motor Fuel Blending Stock

C5 raffinate is a light hydrocarbon stream from di-isopropylbenzene extraction, rich in pentanes and olefins, used as a gasoline blending component. It falls under HTS 2710.12.18.90 due to its light oil properties (90%+ at 210°C), >70% petroleum content, and role as motor fuel blending stock. This by-product improves gasoline volatility and octane.

Import Duty Rates by Country of Origin

Origin CountryMFN RateCh.99 SurchargesTotal Effective Rate
🇨🇳ChinaFree+25.0%25%
🇲🇽MexicoFreeFree
🇨🇦CanadaFreeFree
🇩🇪GermanyFreeFree
🇯🇵JapanFreeFree

Alternative Classifications

This product could be classified differently depending on its characteristics or intended use.

2711.12.00Same rate: 25%

If containing liquefied natural gas hydrocarbons

Liquefied petroleum gases like propane/propylene mixtures classify under 2711 based on physical state.

2710.12.45Same rate: 25%

If used in jet fuel formulations

Jet fuel blending stocks have dedicated subheadings when specified for aviation motor fuel.

2901.29.10Higher: 35% vs 25%

If isolated acyclic hydrocarbons predominate

High-purity chemical streams shift to Chapter 29 acyclic hydrocarbons.

Not sure which classification is right?

Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.

Import Tips & Compliance

Submit gas chromatography reports proving C5 composition and distillation curve to confirm light oil status

Label as 'blending stock only - not for retail sale' to avoid confusion with finished fuels; track Reid Vapor Pressure

Related Products under HTS 2710.12.18.90

Reformate Motor Fuel Blending Stock

Reformate is a high-octane petroleum distillate produced in oil refineries through catalytic reforming, primarily used as a blending stock to boost octane ratings in gasoline. It qualifies under HTS 2710.12.18.90 as a light oil motor fuel blending stock, with 90% or more distilling at 210°C, containing over 70% petroleum oils as the basic constituent, and not classified as biodiesel or waste. This product is essential for producing premium unleaded gasoline.

Alkylate Motor Fuel Blending Stock

Alkylate is a clean-burning, high-octane blending component derived from reacting isobutane with olefins in refineries, used to enhance gasoline performance. Classified under HTS 2710.12.18.90 as it meets light oil criteria (90%+ distill at 210°C), has ≥70% petroleum oils, and serves as motor fuel blending stock excluding biodiesel. It's prized for low volatility and high blending value in premium fuels.

Isomerate High-Octane Blending Stock

Isomerate is a branched paraffin-rich stream from naphtha isomerization processes, providing high octane without aromatics for clean gasoline blending. Under HTS 2710.12.18.90 as light motor fuel blending stock: >70% petroleum oils, 90%+ distill at 210°C. Ideal for low-emission reformulated blends.

Platformate Gasoline Blending Component

Platformate, a reformate variant, is a toluene-rich high-octane stream from continuous catalytic reforming for gasoline pools. HTS 2710.12.18.90 covers it as other motor fuel blending stock light oils (>70% petroleum, light distillate). Critical for meeting octane specs in summer blends.

FCC Light Naphtha Blending Stock

FCC light naphtha from fluid catalytic cracking units is an olefin-rich light distillate used for gasoline blending to adjust octane and density. HTS 2710.12.18.90 applies as a motor fuel blending stock: light oils with ≥70% petroleum oils, distilling 90%+ at 210°C, excluding biodiesel. It's key for producing reformulated gasoline.