Titaniferous Slag from Electric Arc Furnace
Slag generated in electric arc furnaces processing titanium-rich materials, assaying over 40% titanium oxide. Suitable for industrial recovery of titanium without treatment for base metals due to low Cu/Pb/Zn. Classified under 2620.99.5000 as other non-iron/steel slags for metal extraction.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If from iron or steel manufacture
Granulated slag from iron/steel production is specifically in 2618, excluded from 2620.
If coarse iron ore particles dominate
Coarse iron ores (>4.75mm particles) are classified in 2601, not slags.
If ferro-titanium bearing and treated as alloy
Ferrous alloys with titanium shift to Chapter 72 if meeting alloy definitions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Submit laboratory assays for titanium and impurity levels to CBP for verification
• Avoid common pitfall of misdeclaring as steel slag, which falls under 2618-2619
• Label clearly as 'not for Cu/Pb/Zn recovery' to comply with subheading conditions
Related Products under HTS 2620.99.50.00
High-Titanium Ilmenite Slag
A byproduct slag from ilmenite smelting containing over 40% titanium by weight, primarily used as feedstock for titanium dioxide production. It meets HTS 2620.99.5000 criteria as it has low levels of recoverable copper, lead, or zinc under 2%. This classification applies to slags not from iron/steel manufacture and intended for metal extraction or chemical compound production.
Ti-Slag from Plasma Furnace
Titanium-enriched slag produced via plasma arc reduction of ilmenite, with >40% titanium content and minimal base metals. Used as basis for titanium chemical compounds, not for Cu/Pb/Zn recovery. Meets precise 2620.99.5000 subheading requirements.
Synthetic Rutile Process Slag
Residue slag from the synthetic rutile upgrading process of ilmenite, rich in titanium (>40% by weight). Low in recoverable copper, lead, zinc; used directly in chloride-process TiO2 pigment manufacture. Fits 2620.99.5000 for titanium-rich industrial slags.
Leucoxene Slag Residue
High-grade titanium slag from leucoxene (altered ilmenite) processing, exceeding 40% TiO2 equivalent. Not treated for base metal recovery; destined for titanium metal or pigment production. Classified in 2620.99.5000 per chapter notes for metal-extraction residues.