Kiruna Magnetite Concentrate
Kiruna-type magnetite concentrate from Sweden's LKAB mines is a high-purity, non-agglomerated powder with 69% Fe, used in premium steel grades. HTS 2601.11.0030 applies to this beneficiated, non-agglomerated iron ore product.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If antimony content significant
Ores with antimony classified under 2617.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Provide LKAB specification sheets for customs verification
• Ensure low phosphorus certification for specialty steel compliance
• Declare as 'fines' not pellets to match heading
Related Products under HTS 2601.11.00.30
Magnetite Iron Ore Concentrate
Magnetite iron ore concentrate is a finely ground, non-agglomerated product with high iron content, typically over 65% Fe, produced by processing raw magnetite ore through crushing, grinding, and magnetic separation. It falls under HTS 2601.11.0030 as non-agglomerated iron ore concentrates, distinguished from agglomerated forms like pellets or sinter.
Hematite Iron Ore Concentrate
Hematite iron ore concentrate is a high-purity, non-agglomerated powder derived from hematite deposits, with iron content around 67% Fe after beneficiation via gravity or magnetic separation. Classified under HTS 2601.11.0030 for non-agglomerated concentrates, it is used directly in blast furnaces.
Taconite Iron Ore Concentrate
Taconite iron ore concentrate is produced from low-grade banded iron formations, ground to fine non-agglomerated particles with 65-68% Fe after magnetic separation. It is specifically under HTS 2601.11.0030 as non-agglomerated concentrates, prior to any pelletizing.
Goethite Iron Ore Concentrate
Goethite iron ore concentrate is a fine, non-agglomerated product from limonitic ores, enriched to 60-65% Fe through wet beneficiation processes. HTS 2601.11.0030 covers such non-agglomerated concentrates used in direct reduction ironmaking.
Siderite Iron Ore Concentrate
Siderite iron ore concentrate is derived from sedimentary carbonate ores, finely milled and magnetically separated to yield non-agglomerated powder with 62% Fe content. It is classified in HTS 2601.11.0030 for its concentrate form, excluding roasted pyrites.
High-Grade Pilbara Iron Ore Concentrate
Pilbara iron ore concentrate from Australia features premium 67%+ Fe in non-agglomerated fine form, produced via dense media separation. Under HTS 2601.11.0030 as non-agglomerated concentrates, ideal for low-impurity steel production.