Fluorspar Briquettes Low Grade
Compressed low-grade fluorspar (94% CaF2) into briquettes for easier handling in aluminum smelting. Falls under HTS 2529.21.00.00 as agglomerated fluorspar not further worked, maintaining ≤97% CaF2 content.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If heavily bound or mixed with other minerals
Agglomerates not predominantly fluorspar fall under general mineral substances heading.
If prepared with chemical anti-caking agents
Additized prepared binders classify as chemical preparations for industrial use.
If for high-grade (>97%) briquetted fluorspar
Purity determines subheading even when briquetted.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Declare briquette binder type (e.g
• lignosulfonate <5%) to confirm not 'worked' beyond heading scope
• Obtain smelter end-user certification for preferential tariff treatment under FTAs
Related Products under HTS 2529.21.00.00
Acid Grade Fluorspar Lump
Lump fluorspar containing approximately 97% calcium fluoride (CaF2), primarily used in the production of hydrofluoric acid for industrial chemical processes. This natural mineral extract falls under HTS 2529.21.00.00 due to its CaF2 content not exceeding 97% by weight and its raw, unprocessed form as fluorspar.
Metallurgical Grade Fluorspar Fines
Crushed fluorspar fines with 95-97% CaF2 content, used as a fluxing agent in steelmaking to lower melting points. Classified under HTS 2529.21.00.00 as low-grade fluorspar chunks or powder not exceeding 97% calcium fluoride purity.
Ceramic Fluorspar Powder
Ground fluorspar powder at 96% CaF2 for use in ceramic glazes and enamels to improve fluidity. This product is specifically under HTS 2529.21.00.00 because it is natural fluorspar with CaF2 content at or below 97% weight, in crude or powdered form.
Raw Fluorspar Chips for HF Production
Chipped fluorspar at 92-96% CaF2 uniformity, sized 10-50mm for feeding into hydrofluoric acid reactors. This raw material is classified in HTS 2529.21.00.00 for its sub-97% calcium fluoride concentration as natural fluorspar.
Fluorspar Gravel 95% CaF2
Natural fluorspar gravel screened to 3-10mm with 95% CaF2 for flux in phosphate fertilizer production. HTS 2529.21.00.00 applies to this ≤97% purity fluorspar in granular crude form.