Limestone Monument Facade Slab
Rectangular limestone slabs exceeding 7.5 cm thickness, sawn for monumental facades or historical restorations. Classified in HTS 2516.90.0030 for other building stone not roughly trimmed beyond rectangular blocks.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If cut for mosaics or further finished
Chapter note (f) excludes mosaic cubes and worked veneers to 6802.
If marble rather than limestone
Limestone vs marble distinction by composition; marble has dedicated subheading.
If containing micaceous iron oxides
Heading 2530 covers natural micaceous iron oxides, potentially overlapping mineral compositions.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Test for dolomite content; high dolomite may require ramming mix exclusion check under 3816
• Provide CAD drawings showing rectangular shape only; any profiles indicate worked stone
• Comply with cultural heritage export permits if from protected quarry sites
Related Products under HTS 2516.90.00.30
Thick Granite Countertop Slab
A large slab of granite, roughly trimmed and cut into rectangular shape with a thickness exceeding 7.5 cm, used for high-end kitchen countertops or monumental applications. It falls under HTS 2516.90.0030 as 'other monumental or building stone' that is merely cut by sawing into blocks or slabs of rectangular shape, meeting the specified thickness requirement.
Heavy Sandstone Building Slab
Rectangular sandstone slabs over 7.5 cm thick, roughly sawn for use in constructing exterior walls or facades in monumental architecture. Classified under HTS 2516.90.0030 for other building stone merely cut into slabs, excluding specific types like granite.
Thick Porphyry Monumental Block
Large porphyry stone blocks sawn to rectangular slabs thicker than 7.5 cm, intended for custom monumental sculptures or memorials. Fits HTS 2516.90.0030 as roughly trimmed other monumental stone not further processed.
Basalt Exterior Wall Slab
Heavy basalt slabs over 7.5 cm thick, cut rectangular for cladding exterior walls of commercial buildings. Under HTS 2516.90.0030 as other monumental or building stone, roughly trimmed or sawn.
Thick Quartzite Building Block
Quartzite stone sawn into thick rectangular slabs over 7.5 cm for structural building blocks in modern architecture. Meets HTS 2516.90.0030 criteria for other monumental stone merely cut by sawing.
Gneiss Cladding Slab
Gneiss metamorphic stone slabs thicker than 7.5 cm, rectangular sawn for exterior cladding in public monuments. HTS 2516.90.0030 applies to this other building stone not further processed.