White Sandstone Structural Slabs
Large white sandstone slabs rectangularly sawn to 36x18x6 inches for structural beams and lintels. HTS 2516.20.20.00 applies as they are roughly trimmed and merely cut without further fabrication. Valued for high compressive strength in heritage buildings.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If sold for monumental sculpture
Stone for statuary, even roughly cut, may classify in 6802.91 if end-use intent shown.
If dolomite or low-silica variant
Dolomite ramming mix excludes to other headings, but mere blocks may go to 2514.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Certify compressive strength tests to support building stone use without implying processing
• Detail saw blade width in processing description for 'merely cut' proof
Related Products under HTS 2516.20.20.00
Buff Sandstone Slabs
Large rectangular slabs of buff-colored sandstone, sawn to dimensions around 8x4x2 inches, intended for building foundations and retaining walls. Classified under HTS 2516.20.20.00 because they are roughly trimmed and merely cut by sawing into rectangular shapes without additional machining. Ideal for load-bearing structures due to compressive strength.
Gray Sandstone Facade Slabs
Rectangular gray sandstone slabs cut by sawing to 24x12x3 inches for building facades and cladding. Falls under HTS 2516.20.20.00 as merely cut without carving, drilling, or finishing processes. Provides weather-resistant surfacing for commercial structures.
Pink Sandstone Cladding Blocks
Rectangular pink sandstone blocks sawn to 20x10x3 inches for wall cladding and veneers. Qualifies for HTS 2516.20.20.00 as only saw-cut into rectangular shapes with no polishing or detailing. Popular for modern and traditional facades.
Beige Sandstone Garden Slabs
Beige sandstone rectangular slabs cut by sawing to 18x9x1.5 inches for garden edging and raised beds. Under HTS 2516.20.20.00 for being merely sawn into rectangular blocks suitable for landscaping. Rustic finish complements outdoor greenery.
Red Sandstone Building Blocks
Rectangular blocks of red sandstone, cut by sawing into uniform slabs measuring approximately 2x1x0.5 feet, suitable for constructing exterior walls and facades. This product falls under HTS 2516.20.20.00 as it is merely cut into rectangular blocks without further shaping, trimming, or processing beyond rough sawing. Primarily used in architectural applications for its durability and aesthetic appeal.
Yellow Sandstone Wall Blocks
Sawn yellow sandstone blocks in rectangular form, typically 16x8x4 inches, used for masonry walls and garden features. Meets HTS 2516.20.20.00 criteria as it is only roughly trimmed and cut by sawing into slabs of rectangular (including square) shape. Offers natural texture for rustic architectural designs.