Noce Travertine Block
Noce travertine blocks featuring rich brown veining, sawn into uniform rectangular shapes from high-density calcareous deposits with specific gravity above 2.5. This product matches HTS 2515.12.20.00 as merely cut travertine for construction or monumental purposes. Popular for exterior facades due to its weather-resistant properties.
Import Duty Rates by Country of Origin
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If roughly-trimmed rather than sawn into rectangles
Travertine trimmed only by splitting or rough-hewing goes to the prior subheading 2515.12.10, not precise sawn blocks.
If agglomerated or reconstituted from splittings
Agglomerated travertine products, even if resembling natural slabs, classify under 6815 as built-up stone articles.
If for industrial or commercial end-use after minimal working
Slightly worked marble-like travertine for specific uses may shift to Chapter 68 worked stones.
Not sure which classification is right?
Our AI classifier can analyze your specific product and recommend the correct HTS code with confidence.
Import Tips & Compliance
• Conduct density tests pre-shipment and include reports in documentation to substantiate classification over lower-gravity alternatives
• Avoid mixing with marble blocks in same container to prevent co-classification disputes at customs
• Declare as 'rough blocks' explicitly; finishing post-import keeps it under this low-duty raw material code
Related Products under HTS 2515.12.20.00
Tuscan Cream Travertine Block
A large rectangular block of Tuscan Cream travertine, a calcareous building stone with an apparent specific gravity exceeding 2.5, roughly sawn into slab dimensions for further processing. It falls under HTS 2515.12.20.00 as travertine merely cut by sawing into rectangular blocks suitable for monumental or construction use. This natural stone originates from Italian quarries and is prized for its warm beige tones and durability.
Classic Travertine Slab
Rectangular slabs of classic travertine, sawn directly from quarry blocks, with the characteristic porous texture and high specific gravity over 2.5 typical of this calcareous stone. Classified under HTS 2515.12.20.00 for travertine roughly trimmed or merely cut into blocks or slabs for building and monumental applications. Ideal for suppliers fabricating countertops or cladding.
Silver Travertine Slab
Silver travertine slabs, cut by sawing into rectangular (square) blocks with subtle grey tones and dense structure meeting the 2.5+ specific gravity threshold. HTS 2515.12.20.00 applies to this merely cut form of travertine, a calcareous monumental stone used in high-end architecture. Sourced from premium quarries for precise fabrication.
Honed Travertine Block
Caution: primarily for contrast; these rectangular honed travertine blocks risk reclassification but if declared as merely sawn qualify under HTS 2515.12.20.00 for travertine with SG>2.5. Light honing may be overlooked if minimal, used for premium building stone imports.
Walnut Travertine Rectangular Slab
Walnut travertine slabs sawn into precise rectangular shapes, exhibiting nutty brown hues and the dense, high-gravity (>2.5) properties of natural calcareous travertine. Fits HTS 2515.12.20.00 as unworked blocks or slabs for monumental and building stone fabrication. Commonly used for interior flooring bases.
Bianco Travertine Block
Bianco (white) travertine blocks, merely sawn into rectangular dimensions from dense quarry stone with specific gravity over 2.5. HTS 2515.12.20.00 covers this form of travertine as calcareous monumental or building stone prior to further processing.