Professional Disc Micrometer
A disc anvil micrometer for measuring pitch diameter of screw threads. It is a specialized micrometer for thread length parameters, fitting under this tariff item.
Import Duty Rates by Country of Origin
| Origin Country | MFN Tariff | Surtaxes | Total Effective Rate |
|---|---|---|---|
| 🇨🇳China | 4% | — | 4% |
| 🇲🇽Mexico | 4% | — | 4% |
| 🇺🇸United States | 4% | — | 4% |
| 🇩🇪Germany | 4% | — | 4% |
| 🇯🇵Japan | 4% | — | 4% |
PGA flags (1)Show detailsHide detailsHCConsumer Products SafetyMay be required
- HC
Consumer Products Safety · May be required · on some HTS numbers under this code
May require HC Consumer Products Safety depending on intended use (HC21) and Canadian product category (HC29, HC30, HC31, HC32, HC33, HC34, HC35, HC36, HC37); or intended use (HC22, HC23, HC24, HC26, HC27) and Canadian product category (HC37), and on the full 10-digit classification number (only some numbers under this code are listed). Matching criteria: Equal To 9017300010; Equal To 9017300020; Equal To 9017300010; Equal To 9017300020. Logic: MATCH IF (Valid HS Code) AND (Intended Use Code) AND (Valid Canadian Product Category).
CBSA Single Window matching criteria, unknown
More Specific Codes
This product may fall under a more specific subheading:
Alternative Classifications
This product could be classified differently depending on its characteristics or intended use.
If the disc micrometer is for a specific industry
Industry-specific tools may be classified elsewhere.
Not sure which classification is right?
The Tariff Assistant works through the GRI rules on your specific product to reach the right tariff item — and can price the duty on it in the same conversation.
Import Tips & Compliance
• Declare the micrometer as a thread measuring tool
• Ensure the disc anvils are in good condition
• Keep the product manual for classification
Related Products under Tariff item 9017.30.00
Accu-Lab Dial Caliper 0-200mm
A shockproof dial caliper with a balanced beam design, offering a 200mm measurement capacity. It is a hand-held instrument for measuring length, classified under this tariff item as a caliper with an analog dial readout.
Brown & Sharpe TESA Vernier Micrometer
A high-precision vernier micrometer with tungsten carbide measuring faces, designed for 0-25mm range measurements. It is a specialized hand-held instrument for measuring length, fitting under this tariff item as a micrometer.
Center Gauge
A 30/60-degree center gauge used for setting lathe tool grinding angles and finding centerlines. It falls under tariff item 9017.30.00 as a handheld gauge for measuring angles and lengths, not specified elsewhere in Chapter 90.
Depth Micrometer
A ratchet-style depth micrometer with interchangeable rods for measuring depths from 0 to 6 inches with 0.001-inch resolution. It is classified under tariff item 9017.30.00 as a dedicated handheld depth gauge for length measurement.
Dial Indicator Gauge
A mechanical dial indicator gauge with 0.0005-inch resolution and a continuous dial for measuring surface flatness and runout on lathes. It is classified under tariff item 9017.30.00 as a handheld comparator-style gauge for manual length verification.
Digital Vernier Caliper
A handheld digital vernier caliper with a digital readout for measuring internal, external, and depth dimensions up to 6 inches. It is classified under tariff item 9017.30.00 as a handheld caliper for length measurement, not specified elsewhere in Chapter 90.