Parts and accessories
Apparatus and equipment for photographic (including cinematographic) laboratories, not specified or included elsewhere in this Chapter; negatoscopes; projection screens. > Parts and accessories > Parts and accessories
Duty Rate (from China)
Subheadings
Products classified under Tariff item 9010.90.00
9010.50 Developer Tank Lid
> A light-tight lid with a pour spout designed for stainless steel developer tanks used in photographic laboratory processing apparatus. It prevents oxidation and light fogging during development, making it an essential accessory for the developing equipment of heading 90.10. As a dedicated part for photographic laboratory apparatus, it is classified under tariff item 9010.90.00.
9010.60 Fixer Filter Cartridge
> An activated carbon cartridge used to filter silver particles from used fixer solutions in photographic laboratory recycling apparatus. It extends the life of chemicals and is a consumable part designed for use with fixing equipment of heading 90.10. This cartridge is classified as a part or accessory under tariff item 9010.90.00.
Beseler Film Drying Rack
> A stainless steel rack with clips for hanging wet photographic film strips to dry evenly without dust or water spots. It is designed as a specialized accessory for photographic laboratories and prevents damage to processed film. This drying rack is classified under tariff item 9010.90.00.
Chemical Storage Bottle Adapter
A plastic adapter used to pour photographic chemicals from bulk bottles into measuring graduates without spills. It is a lab accessory that facilitates safe chemical handling in photo processing, falling under the parts and accessories category for photographic laboratory equipment. Its design is specific to photographic chemical management, not general laboratory use.
Cine Film Perforation Punch Die
> A replaceable carbide die set used to repair damaged perforations on motion picture film in photographic laboratories. It is precision-aligned for sprocket feed and is designed exclusively for use with film repair equipment of heading 90.10. As a dedicated part for cinematographic laboratory apparatus, it falls under tariff item 9010.90.00.
Cinematographic Film Dryer Reel
> A perforated metal reel designed to hold 35mm or 16mm motion picture film during warm air drying in photographic laboratory drying apparatus. It prevents water spots and curl, and is specifically made for use with fixing and drying equipment of heading 90.10. This reel is classified as a part under tariff item 9010.90.00.
Contact Printing Frame
> A hinged glass frame used for direct emulsion-to-paper contact exposure under enlarger light in darkrooms. It provides even pressure for sharp results and is designed for use with photographic printing equipment of heading 90.10. This contact printing frame is classified under tariff item 9010.90.00.
Darkroom Enlarger Negative Carrier
A precision glass or plastic carrier that holds 35mm or 4x5 negatives in enlargers for sharp projection printing. It ensures the negative remains flat and dust-free during exposure, making it a critical part of photographic laboratory enlargers. This item is classified under 9010.90.00 as a part specifically designed for photographic lab equipment.
Darkroom Film Hanger Clips
> Stainless steel spring clips used to secure film to hangers during photographic film drying in laboratory processing. They are anti-corrosion coated and designed specifically for use with developing and drying apparatus of heading 90.10. These clips are classified as parts or accessories under tariff item 9010.90.00.
Darkroom Thermometer Clip
A spring-loaded clip used to attach thermometers to developing tanks for constant temperature monitoring during photo processing. It is an accessory for photographic laboratory apparatus, ensuring precise chemical control. This item falls under 9010.90.00 as a part or accessory for photo lab equipment.
Film Cassette Opener Tool
A plastic tool designed for safely opening 35mm film cassettes in darkrooms without damaging the film leader. It is a photo lab accessory used for film loading and unloading, falling under the parts and accessories category for photographic laboratory equipment. Its specific design for film handling makes it a specialized tool.
Film Developing Drum
> A cylindrical plastic or stainless steel drum used to develop photographic film in daylight conditions without exposure to light. It is specifically designed as an accessory for photographic laboratory apparatus and enables controlled chemical processing. This drum is classified under tariff item 9010.90.00 as a part of photographic lab equipment.
Film Fixer Agitator Paddle
> A chemical-resistant plastic paddle used for manual agitation of film in photographic fixing tanks. It prevents uneven development streaks and is designed for use with fixing apparatus of heading 90.10. This paddle is classified as a part or accessory under tariff item 9010.90.00.
Film Leader Retriever Tool
> A stainless steel hook tool designed to retrieve broken film leaders from photographic developing tanks. It is chemical-resistant and specifically made for use with developing apparatus of heading 90.10. This tool is classified as an accessory under tariff item 9010.90.00.
Film Processing Temperature Control Thermostat
> An electronic thermostat accessory that maintains precise temperatures for developer baths in photographic laboratory apparatus. It is critical for consistent film processing results and is designed for use with developing equipment of heading 90.10. This thermostat is classified as a part under tariff item 9010.90.00.
Film Squeegee Blades
Silicone rubber blades used to remove excess water from processed film before drying. They prevent streaks and watermarks on negatives, making them a photo lab accessory. This item is classified under 9010.90.00 as an accessory for photographic laboratory equipment.
Ilford Photo Chemical Measuring Graduate
A heat-resistant plastic graduate cylinder calibrated for precise measurement of photographic chemicals like stop bath and fixer. It is an accessory for photo laboratories, with markings optimized for chemical handling. This item falls under 9010.90.00 as an accessory for photographic laboratory equipment.
Jobo Film Processing Drum
A rotating cylindrical drum used for inversion agitation during photographic film and paper development in Jobo processors. It is a part for photo lab equipment, allowing precise chemical processing. This item is classified under 9010.90.00 as a part for photographic laboratory apparatus.
Kodak Film Developing Tank
A plastic tank designed for developing photographic film in a darkroom using chemicals like developer and fixer. It is an accessory for photographic laboratory apparatus, enabling controlled chemical processing. This item falls under 9010.90.00 as an accessory for photographic laboratory equipment.
Motion Picture Lab Film Splicer Blade
> A precision steel blade used for ultrasonic splicing of 16mm or 35mm cinematographic film in photographic laboratories. It creates permanent joins for editing and is designed for use with splicing equipment of heading 90.10. This blade is classified as a part under tariff item 9010.90.00.
Negatoscope Viewing Mask
An adjustable cardboard or plastic mask for negatoscopes, blocking excess light when inspecting film density. It is a part for photographic lab film analysis equipment. This item is classified under 9010.90.00 as a part for photographic laboratory apparatus.
Photo Enlarging Easel Base
An adjustable metal base plate with registration pins designed to hold photographic paper flat beneath an enlarger. It ensures precise exposure alignment during the printing process, functioning as a specialized accessory for photographic laboratory equipment. This item is classified as a part or accessory under tariff item 9010.90.00 because it is used solely with photographic enlargers and lab setups.
Photographic Film Squeegee Roller
> A precision rubber roller used to remove excess developer or fixer chemicals from photographic film strips after processing. It is an essential accessory for apparatus in subheadings 9010.50 and 9010.60, ensuring even chemical distribution. This roller is classified under tariff item 9010.90.00 as a part of photographic lab equipment.
Photo Lab Chemical Tray
> A stainless steel or chemical-resistant plastic tray designed for holding developing, stopping, and fixing solutions in photographic laboratory workflows. It is tailored for use with developing and fixing equipment of heading 90.10. This tray is classified as a part or accessory under tariff item 9010.90.00.
Photo Paper Safe Light Filter
A red or amber gel filter for darkroom safelights, allowing handling of photo paper without fogging. It is an accessory for photographic laboratories, calibrated to specific wavelengths safe for emulsions. This item falls under 9010.90.00 as an accessory for photographic laboratory equipment.
Photo Processing Timer Switch
> An analog timer switch accessory used to control exposure times in photographic enlargers and processors. It features a photo-safe red LED display and is designed for use with apparatus of heading 90.10. This timer switch is classified under tariff item 9010.90.00.
Projection Screen Frame Kit
A collapsible aluminum frame for tensioned photographic projection screens in labs. It is an accessory for photo projection equipment, ensuring a flat viewing surface. This item is classified under 9010.90.00 as an accessory for photographic laboratory equipment.