Numerically controlled press brakes
Machine-tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine-tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above. > Bending, folding, straightening or flattening machines (including press brakes) for flat products: > Numerically controlled press brakes > Numerically controlled press brakes > Numerically controlled press brakes
Duty Rate (from China)
Products classified under Tariff item 8462.23.00
Amada HFE-M2 Series Numerically Controlled Press Brake
The Amada HFE-M2 Series is a numerically controlled press brake designed for precision bending of sheet metal. Its servo-hydraulic drive and CNC automation enable accurate, repeatable forming of flat metal products, which falls under tariff item 8462.23.00 for numerically controlled press brakes.
Budget CNC Straightening Press Brake
This budget CNC straightening press brake is a numerically controlled machine for straightening and bending flattened metal sheets up to 2000mm. Valued under $3,025, it is classified under tariff item 8462.23.00 as a numerically controlled press brake.
Bystronic Xpert 40 CNC Press Brake
The Bystronic Xpert 40 is a compact numerically controlled press brake for precision bending of sheet metal in small batches. Its CNC system and servo-hydraulic drive make it a typical press brake for flat products, classified under 8462.23.00.
CNC Hydraulic Press Brake 2500mm
This CNC hydraulic press brake is a numerically controlled machine for bending sheet metal up to 2500mm with 80-ton force. Valued under $3,025, it is classified under tariff item 8462.23.00 as a numerically controlled press brake.
CNC Press Brake with Auto-Clamping
A CNC press brake with automatic tool clamping, designed for rapid setup and bending of flat metal sheets up to 1800mm. It is numerically controlled, meeting the definition of a press brake under tariff item 8462.23.00. This machine is valued under $3,025, which places it in the lower-value category of numerically controlled press brakes.
Desktop CNC Sheet Metal Bender
A benchtop CNC sheet metal bender, designed for thin sheet metal bending in workshops with a 600mm capacity and under 15 tons of force. It is numerically controlled and fits the description of a press brake under tariff item 8462.23.00. Its low-cost design, under $3,025, places it in the lower-value category.
Durma AD-R Series Servo Hydraulic CNC Press Brake
A Durma AD-R Series servo-hydraulic CNC press brake with advanced numerically controlled technology for precise bending, folding, and flattening of flat metal products, featuring Delem CNC controllers. It is classified under tariff item 8462.23.00 as a numerically controlled press brake, in the 'other' category for higher-value machines.
Durma AD-R Series Servo Hydraulic Press Brake
The Durma AD-R Series is a servo-hydraulic numerically controlled press brake for bending mild steel up to 12mm thick. Its CNC controls and energy-efficient operation are characteristic of press brakes for flat metal products, fitting tariff item 8462.23.00.
Electric CNC Flattening Brake 1200mm
An all-electric CNC flattening brake with a 1200mm capacity, designed for flattening and precision bending of stainless steel flats. It is numerically controlled and falls under tariff item 8462.23.00 as a press brake. Valued under $3,025, it is classified in the lower-value category.
Entry-Level CNC Press Brake 1500mm
An entry-level CNC press brake with a 1500mm capacity and 50-ton tonnage, designed for small shop use and prototyping with a servo-electric drive. It is numerically controlled and falls under tariff item 8462.23.00. Valued below $3,025, it is classified in the lower-value category.
LVD Strippit Dyna-Press CNC Press Brake
The LVD Strippit Dyna-Press is a numerically controlled press brake with touchscreen CNC for programming complex bends. It is designed for bending flat metal products up to 4mm thick, making it a clear fit for tariff item 8462.23.00.
Micro CNC Press Brake for Prototyping
A micro CNC press brake for rapid prototyping of metal flat parts, with an 800mm bed and 20-ton force. It is numerically controlled and fits tariff item 8462.23.00 as a press brake. Its sub-$3,025 price targets makerspaces, placing it in the lower-value category.
Numerical Control Brake for HVAC Ducts
A specialized numerically controlled press brake for folding HVAC sheet metal ducts, with a 1600mm width capacity. It is numerically controlled and falls under tariff item 8462.23.00. Its under-$3,025 price aligns with the lower-value category for numerically controlled flattening machines.
Portable CNC Folding Press Brake
A portable CNC folding press brake for on-site folding of steel flat products up to 1000mm wide, with 30-ton force. It is numerically controlled and fits tariff item 8462.23.00. Its under-$3,025 valuation places it in the lower-value category for numerically controlled press brakes.
Rebuilt Durma AD-R 4020 Press Brake
This rebuilt Durma AD-R 4020 is a reconditioned numerically controlled press brake for heavy-duty folding and straightening of flat steel plates up to 4m wide. As a rebuilt CNC press brake for flat products, it falls under tariff item 8462.23.00.
Rebuilt LVD Strippit PPEB Press Brake
This rebuilt LVD Strippit PPEB is a precision press brake with Touch-B cell numerical control for programming bends on stainless steel flat products. As a rebuilt CNC press brake for flat metal, it is classified under 8462.23.00.
Rebuilt Trumpf TruBend 5130 Press Brake
This rebuilt Trumpf TruBend 5130 is a refurbished CNC press brake for precise straightening, folding, and bending of flat metal sheets up to 3mm thick. With its Delem control system, it fits tariff item 8462.23.00 for numerically controlled press brakes.
Salvagnini P4lean CNC Press Brake
The Salvagnini P4lean is a numerically controlled press brake with automatic setup and adaptive bending technology for flexible panel production. Its servo-electric drives and CNC control make it a press brake for flat products, classified under 8462.23.00.
Servo CNC Press Brake for Aluminum Sheets
A numerically controlled servo-electric press brake optimized for bending thin aluminum flat sheets, with 40-ton capacity and 1200mm throat depth. It is numerically controlled and falls under tariff item 8462.23.00. Its low value under $3,025 qualifies it for the lower-value category.
Trumpf TruBend 5000 Series CNC Press Brake
The Trumpf TruBend 5000 is a numerically controlled press brake for high-speed bending of steel, aluminum, and stainless steel sheets. Its ACB wireless angle measuring system and CNC control are typical for press brakes on flat products, fitting 8462.23.00.
Trumpf TruBend 7000 Series CNC Press Brake
A Trumpf TruBend 7000 Series CNC press brake, a high-speed numerically controlled press brake for folding and bending flat sheet metal with automatic tool changers and precision backgauges. It is classified under tariff item 8462.23.00 as a numerically controlled press brake, in the 'other' category for higher-value machines.
Used Amada HFE-M2 Press Brake
This used Amada HFE-M2 is a rebuilt numerically controlled press brake for bending and folding sheet metal flat products with servo-hydraulic technology. As a used CNC press brake for flat products, it falls under tariff item 8462.23.00.
Used Bystronic Xpert 40 Press Brake
This used Bystronic Xpert 40 is a servo-electric numerically controlled press brake for high-speed bending of aluminum and steel flat sheets. As a used CNC press brake for flat products, it is classified under 8462.23.00.
Used Gasparini Gamma-PB CNC Press Brake
This used Gasparini Gamma-PB is a high-speed numerically controlled press brake for flattening and bending large-format flat metal sheets with a 5-axis backgauge. As a used CNC press brake for flat products, it fits tariff item 8462.23.00.
Used Salvagnini P4lean Press Brake
This used Salvagnini P4lean is a refurbished panel bender with automatic numerical control for complex folding sequences on thin flat metal sheets. As a used CNC press brake for flat products, it falls under tariff item 8462.23.00.