Other
Refrigerators, freezers and other refrigerating or freezing equipment, electric or other; heat pumps other than air conditioning machines of heading 84.15. > Parts: > Other > Other
Duty Rate (from China)
Subheadings
Products classified under Tariff item 8418.99.90
100W DC Solar-Powered Condensing Unit
A low-voltage 100W DC condensing unit designed for off-grid solar-powered vaccine carriers and coolers. It consists of a brushless motor, compressor, and condenser coil, functioning as a modular refrigeration part. This item falls under tariff item 8418.99.90 as an 'other' part of refrigerating equipment, not elsewhere specified.
1.0 kW Monoblock Condensing Unit for Vending Machines
An integrated monoblock 1.0 kW condensing unit for refrigerated vending machines selling beverages and snacks. It combines a compressor, condenser, and fan in a single housing, serving as a modular part for commercial vending equipment. This item is classified under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
1.2 kW Remote Condensing Unit for Ice Machines
A remote outdoor 1.2 kW condensing unit paired with ice machine evaporators for hotels and restaurants, featuring a weatherproof housing. It serves as a modular part for freezing equipment, ensuring reliable ice production. This item falls under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
1.5 Ton Commercial Refrigeration Condensing Unit
A condensing unit rated at 1.5 tons (approximately 1.8 kW), consisting of a compressor, condenser coil, and fan assembly, designed for pairing with evaporators in commercial walk-in coolers. It serves as a modular part for large-scale refrigeration systems. This item is classified under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
1.8 kW Air-Cooled Condenser Unit for Walk-In Freezers
A top-mounted air-cooled condensing unit rated at 1.8 kW for low-temperature walk-in freezers in supermarkets, with axial fans and capillary tube expansion. It serves as a modular part for freezing equipment, ensuring consistent low-temperature performance. This item falls under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
1.9 kW Variable Speed Condensing Unit for Supermarket Cases
A BLDC variable speed drive 1.9 kW condensing unit for multi-compartment supermarket refrigerated cases, optimizing energy during partial loads. It serves as a modular part for advanced refrigeration systems, enhancing efficiency. This item is classified under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
1 Ton Water-Cooled Condensing Unit for Beverage Coolers
A compact 1 ton (0.9 kW) water-cooled condensing unit for undercounter beverage coolers in bars and restaurants, featuring a brazed plate heat exchanger. It serves as a modular part for commercial refrigeration, ensuring efficient cooling. This item falls under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
200W R134a Mini Fridge Condensing Unit
An ultra-compact 200W condensing unit using R134a refrigerant, designed for portable mini fridges and dorm coolers. It features a lightweight aluminum condenser and hermetic compressor, serving as a modular part for small-scale refrigeration. This item is classified under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
2 HP R-404A Scroll Compressor Condensing Unit
A 2 horsepower (1.5 kW) outdoor condensing unit using R-404A refrigerant with a scroll compressor, suitable for medium-temperature commercial freezers and coolers. It serves as a modular part for commercial refrigeration systems. This item is classified under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
300W Beverage Cooler Condensing Unit
A low-power 300W condensing unit with a hermetic compressor and air-cooled condenser, intended for undercounter beverage coolers. It functions as a modular refrigeration part, providing cooling for commercial food and beverage storage. This item falls under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
450W Commercial Display Case Condenser
A 450W finned-tube condensing unit designed for glass-door commercial display cases in supermarkets. It includes an expansion valve and mounting brackets, serving as a modular part for food preservation equipment. This item is classified under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
600W Medical Vaccine Fridge Condenser Unit
A precision 600W refrigeration condensing unit for medical vaccine refrigerators, featuring vibration-dampening mounts and a low-noise fan. It serves as a controlled-temperature storage component, ensuring reliable cooling for medical applications. This item falls under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
750W Boundary Hermetic Condensing Unit
A high-efficiency hermetic condensing unit operating at a maximum of 746W, designed for wine coolers. It features copper tubing and a scroll compressor, serving as a modular part for temperature-controlled beverage storage. This item is classified under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
Compressor Mounting Bracket Kit for Heat Pump
Stamped steel mounting brackets with integrated vibration isolators, designed to secure the compressor within heat pump units. These brackets reduce noise transmission and are essential for the structural mounting of the compressor, qualifying as parts of heat pumps.
Condenser Fan Motor Assembly for Household Refrigerator
An electric motor with an attached fan blade that circulates air over the condenser coils in household refrigerators to dissipate heat. Designed for quiet operation and energy efficiency, this assembly is a part of electric refrigerators.
Copeland 1.5 HP Hermetic Condensing Unit
A branded Copeland ZB15KQE 1.5 HP (1.1 kW) hermetic condensing unit for reach-in refrigerators, pre-charged with R-448A low-GWP refrigerant. It serves as a modular part for commercial refrigeration, ensuring efficient and environmentally friendly cooling. This item is classified under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
Defrost Heater Element for Chest Freezer
A tubular electric heating element that melts ice during defrost cycles in chest freezers. Corrosion-resistant and designed for long-term reliability, this element is a part of other freezing equipment.
Digital Temperature Controller for Walk-in Freezer
A microprocessor-based controller that regulates compressor cycles and defrost in walk-in freezers. This controller is essential for the operation of freezing equipment, featuring sensors for temperature monitoring.
Door Gasket Seal for Upright Freezer
A magnetic rubber gasket that ensures an airtight seal on upright freezer doors, preventing frost buildup. Made with food-grade materials for hygiene, this gasket is a part of freezing equipment.
Drier Filter Core Replacement for Refrigeration System
A desiccant core made of molecular sieve that removes moisture from refrigerant lines in AC and refrigeration systems. This bi-directional flow design is a part of refrigerating equipment.
Electronic PCB Control Board for Beverage Cooler
A printed circuit board that manages display, alarms, and cooling cycles in commercial beverage coolers. This control board is a part of refrigerating equipment, including EEPROM for settings storage.
Foam Thermal Insulation Panels for Refrigerator Cabinet
High-density polyurethane foam panels vacuum-formed for refrigerator cabinet walls, providing thermal insulation. These panels are parts of refrigerating equipment, with a thin profile to maximize storage space.
Insulated Copper Refrigerant Tubing Coil
Pre-formed, foam-insulated copper tubing used to connect compressor, condenser, and evaporator in refrigeration systems. This tubing prevents condensation and heat loss, serving as a part of refrigerating equipment.
Leveling Leg Kit for Commercial Freezer Base
Adjustable threaded steel legs with rubber feet for stabilizing commercial freezers on uneven floors. These leveling legs are parts of commercial freezing equipment, with corrosion-resistant zinc plating.
Magnetic Door Switch Sensor for Walk-in Cooler
A reed switch assembly that detects door position in walk-in coolers to control lighting and fans. This sensor is a part of commercial refrigerating equipment, rated IP67 for harsh environments.
Mini Refrigeration Condensing Unit 500W
A compact electric refrigeration condensing unit rated at 500W, consisting of a compressor, condenser coil, and fan, designed for small-scale cooling systems. It functions as a modular part for various refrigeration applications. This item falls under tariff item 8418.99.90 as an 'other' part of refrigerating equipment.
Refrigerant Expansion Valve for Industrial Chiller
A thermostatic expansion valve that meters refrigerant flow into the evaporator of industrial chillers. This valve is a part of refrigerating equipment for non-air-conditioning heat pumps, adjustable for various applications.
Sight Glass Moisture Indicator for Refrigerant Lines
A glass window with a color-changing indicator that shows refrigerant flow and moisture content in lines. This sight glass is a part of refrigerating systems, featuring SAE flare connections.
Stainless Steel Evaporator Coil for Commercial Refrigerator
An evaporator coil that absorbs heat from the interior of commercial refrigerators to facilitate cooling. This key heat exchange component is a part of refrigerating equipment, not specifically covered elsewhere.
Vibration Dampening Pad Set for Outdoor Heat Pump
Neoprene pad sets that isolate outdoor heat pump compressors from concrete pads. These pads are parts of heat pumps, UV and weather resistant for outdoor use.