Of compressors, of a kind used in refrigerating equipment
Air or vacuum pumps, air or other gas compressors and fans; ventilating or recycling hoods incorporating a fan, whether or not fitted with filters; gas-tight biological safety cabinets, whether or not fitted with filters. > Parts > Other > Of compressors, of a kind used in refrigerating equipment
Duty Rate (from China)
Products classified under Tariff item 8414.90.90.30
Adjustable Fan Head Pivot Joint
A friction pivot assembly that allows a table fan head to be tilted up to 30 degrees for directional airflow. Made of zinc die-cast metal with a nylon washer for smooth, durable movement. This part is dedicated to the ergonomic adjustment mechanism of household fans classified under 8414.51.
8414.90.90Axial Fan Blade Assembly
Replaceable blade set for axial fans commonly used in HVAC and cooling towers. These blades optimize airflow direction and efficiency in ventilating systems, and are essential components of the fan itself.
8414.90.90Axial Fan Blade Set for Table Fans
A matched set of 3 to 5 aerodynamic blades designed for axial flow table fans. The blades are engineered with balanced pitch angles to optimize airflow (CFM) in household environments. These blades are specific to fans of heading 8414.51, making them a dedicated part.
8414.90.90Axial Fan Motor Housing
A durable aluminum housing that encloses the motor of an axial fan, used in HVAC ventilating hoods for industrial and commercial air movement. This part is essential for the operation of the fan and is classified as a component of air or vacuum pumps, fans, and ventilating hoods under tariff item 8414.90.90.
8414.90.90Backward Inclined Fan Wheel
A backward-inclined impeller wheel designed for high-pressure ventilating blowers in hoods, featuring a self-cleaning design for dusty environments. This part is used in industrial ventilation systems and is classified under tariff item 8414.90.90 as an 'other' part of fans and ventilating hoods.
8414.90.90Bearing Retainer Ring for Fan Motors
A snap ring and retainer plate that secures ball bearings in the shaded-pole motors of table fans. This part ensures axial stability under vibration during household use. It is a precision component dedicated to the motor assembly of fans under 8414.51.
8414.90.90Blower Diffuser Plate
Perforated plate that diffuses airflow evenly in blowers for uniform ventilation. It is a part of fans used in HVAC and industrial exhaust systems, typically made of galvanized steel for longevity.
8414.90.90Blower Fan Diffuser Cone
A conical diffuser that optimizes airflow exit in industrial blower fans for hood systems, improving efficiency in dust collection ventilation. This part is used in ventilating systems and is classified under tariff item 8414.90.90 as an 'other' part of fans and ventilating hoods.
8414.90.90Blower Outlet Dampener
Adjustable dampener controlling airflow at blower outlets in ventilation ducts. It is a part of fans or blowers for volume regulation, made of galvanized steel with a locking mechanism.
8414.90.90Ceiling Fan Mounting Ring
Heavy-duty ring for suspending industrial ceiling blowers in warehouses. It is a part of fans, with safety chain attachments, made of powder-coated steel.
8414.90.90Centrifugal Blower Impeller
A precision-engineered impeller designed for centrifugal blowers used in industrial ventilation systems. It is a core part of fans and blowers, essential for generating airflow in air movement applications.
8414.90.90Centrifugal Fan Impeller
A precision-engineered impeller designed for use in industrial centrifugal fans, facilitating airflow in ventilating systems. This part is specifically for fans and ventilating hoods and is classified under tariff item 8414.90.90 as an 'other' part, excluding complete fans.
8414.90.90Centrifugal Fan Inlet Guide Vane
Adjustable guide vanes at the inlet of a centrifugal fan for airflow control in hood systems, improving energy efficiency. These vanes are parts of fans and ventilating hoods and are classified under tariff item 8414.90.90 as 'other' parts.
8414.90.90Desktop Fan Motor Housing
A precision-machined housing that encloses the electric motor in desktop fans. It provides vibration damping and heat dissipation for compact household cooling units. This housing is solely dedicated to fans of subheading 8414.51.
8414.90.90Exhaust Hood Fan Grille
A removable stainless steel grille for exhaust hood fans, preventing debris entry while allowing airflow. This part is used in ventilating hoods and is classified under tariff item 8414.90.90 as an 'other' part, corrosion-resistant for kitchen and lab use.
8414.90.90Fan Bearing Housing Assembly
Sealed bearing housing for high-speed fans and blowers in continuous duty applications. It is a fan part providing lubrication retention and alignment, made of stainless steel with precision tolerances.
8414.90.90Fan Blade Set for Ventilating Hood
A matched set of aluminum propeller blades for replacement in commercial ventilating hood fans, balanced for low noise and high static pressure. These blades are parts of fans and ventilating hoods and are classified under tariff item 8414.90.90 as 'other' parts.
8414.90.90Fan Capacitor Start Assembly
An oil-filled run capacitor mounted in an enclosure, designed for single-phase motors in table and pedestal fans. It provides the phase shift needed for torque in household models. This electrical part is exclusive to fans of heading 8414.51.
8414.90.90Fan Head Mounting Collar
A threaded collar that secures the fan head to the neck tube in pedestal and table fans. It features a knurled surface for hand-tightening and a locking mechanism. This structural part is unique to consumer fans of 8414.51.
8414.90.90Fan Housing End Plate
A machined end plate that seals fan housings in industrial ventilating applications, precision bored for shaft bearings. This part is used in fans and ventilating hoods and is classified under tariff item 8414.90.90 as an 'other' part.
8414.90.90Fan Power Cord Bushing Set
Strain relief bushings and cord grips that secure power leads in table fan housings. These parts prevent wire fatigue in consumer models that undergo drop-test certification. They are minor but essential safety parts for fans of 8414.51.
8414.90.90Fan Speed Controller Circuit Board
A printed circuit board with capacitors and triacs that enables variable speed control in table fans. It provides 3-speed settings via a rotary switch common in consumer models. This electronic part is dedicated to the operation of fans under 8414.51.
8414.90.90Fan Vibration Isolator Mount
Rubber-metal isolator mounts reducing vibration transmission in blower installations. They are parts of fans or blowers used in sensitive environments, adjustable for load balancing.
8414.90.90High-Volume Blower Inlet Cone
Funnel-shaped inlet cone accelerating air into high-volume blowers for warehouses. It is a blower part reducing turbulence, made of fiberglass reinforced material for durability.
8414.90.90Hood Fan Vibration Isolator
Rubber isolators that reduce vibration transmission from hood fans to structures, essential for noise control. These isolators are parts of fans and ventilating hoods and are classified under tariff item 8414.90.90 as 'other' parts.
8414.90.90Industrial Blower Scroll Housing
Curved scroll casing that directs airflow in centrifugal industrial blowers for dust collection. It is a blower part optimizing pressure and velocity in ventilation systems, made of heavy-duty steel.
8414.90.90Inline Duct Blower Housing
Durable sheet metal housing for inline duct blowers used in commercial ventilation. It is a structural part of blowers, providing enclosure and mounting for fan components, featuring vibration dampening.
8414.90.90Inline Duct Fan Mounting Bracket
A heavy-duty steel bracket for securing inline duct fans in commercial ventilating systems, ensuring vibration-free installation in ductwork. This bracket is a part of fans and ventilating hoods and is classified under tariff item 8414.90.90 as an 'other' part.
8414.90.90Kitchen Exhaust Fan Grille
Decorative yet functional grille for kitchen ventilating hood fans, preventing object ingress. It is a hood fan part, with optional grease filters, made of stainless steel.
8414.90.90Laboratory Fume Hood Blower Plenum
Pressure plenum chamber distributing air in lab fume hood blowers. It is a ventilating hood part with chemical-resistant coatings, made of stainless steel.
8414.90.90Oscillating Table Fan Gearbox
A compact gearbox that enables left-right oscillation in table fans. It contains reduction gears and linkage for a smooth 90-degree sweep in domestic models. This is an indispensable mechanical part for fans of 8414.51.
8414.90.90Oscillation Mechanism Linkage Kit
A kit of metal linkage rods, pivot joints, and cams that enable smooth oscillation in table fans. It is designed to replace worn components in popular consumer brands. These parts are precision-engineered exclusively for fan models of 8414.51.
8414.90.90Pedestal Fan Base Assembly
A height-adjustable base with counterweight for stability in pedestal fans. It includes a tilt mechanism and wiring channel tailored for floor-standing household fans. This dedicated part justifies classification under 8414.90.90.
8414.90.90Range Hood Blower Wheel
Squirrel-cage blower wheel for residential range hoods, capturing cooking fumes. It is a part of ventilating or recycling hoods with fans, designed for quiet operation and grease resistance, made of plastic or coated metal.
8414.90.90Recycling Hood Filter Frame
Sturdy frame holding filters in air recycling hoods for kitchens or labs. It is a hood part ensuring secure filter seating, made of aluminum extrusion.
8414.90.90Table Fan Impeller Assembly
The rotating blade assembly for table fans, featuring an axial flow design for household air circulation. It is a dedicated part integral to the fan's airflow generation. This impeller assembly is classified under 8414.90.90 as a fan part.
8414.90.90Table Fan Protective Grille
A stamped steel wire grille with safety clips for the front intake of table fans. It meets safety standards with finger-guard spacing for household use. This integral safety part is specific to fans of 8414.51.
8414.90.90Table Fan Switch Assembly
A rotary switch with 0/off/1/2/3 positions and a pull-cord option for table fans. It is rated for 0.5A inductive load typical in household fans. This control part is specific to fan models of 8414.51.
8414.90.90Ventilating Hood Fan Motor Mount
Precision-machined mount for securing motors in kitchen or laboratory recycling hoods. It is a part of ventilating hoods incorporating fans, ensuring stable operation and vibration control.
8414.90.90Vibration Dampening Fan Mounts
Rubber or foam mounts that isolate motor vibration in table fan bases. They reduce noise transmission to 45dB levels in household settings. These acoustic parts are dedicated to consumer fan comfort and are classified under 8414.90.90.